Katuras
31/05/2012, 16h59
Bonjour,
je me permet d'écrire sur ce forum pour solliciter une aide de votre part pour ma configuration de mon serveur Asterisk avec une carte Digium et avec comme opérateur Free.
Version d'Asterisk 1.8.13
Version de Freepbx : 2.9.0.12
Carte Digium TDM410P avec 2 FXO (channel 3 et 4 ) et le module Echo
Operateur ADSL/Téléphonique : Free
Mon problème vient des appels entrant qui ne sont pas logués sur le CLI d'Asterisk et qui ne font pas sonner le téléphone. Les appels sortant fonctionnent parfaitement à partir de softphone ou de téléphone IP Cisco.
Voici les différents fichiers de configuration
root@Asterisk-Debian:/etc/asterisk# lsdahdi
### Span 1: WCTDM/0 "Wildcard TDM410P" (MASTER)
1 unknown Reserved
2 unknown Reserved
3 FXO FXSKS (In use) (EC: VPMOCT032 - INACTIVE) RED
4 FXO FXSKS (In use) (EC: VPMOCT032 - INACTIVE)
root@Asterisk-Debian:/etc/asterisk#
chan-dahdi.conf
;General options
[general]
language=fr
[channels]
context=from-pstn
signalling=fxs_ks
usecallerid=yes
hidecallerid=no
callwaiting=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
busydetect=yes
busycount=10
group=0
#include dahdi-channels.conf
dahdi-channels.conf
; Span 1: WCTDM/0 "Wildcard TDM410P" (MASTER)
;;; line="3 WCTDM/0/2 FXSKS (In use) (EC: VPMOCT032 - ACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
callerid=
group=
context=default
;;; line="4 WCTDM/0/3 FXSKS (In use) (EC: VPMOCT032 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 4
callerid=
group=
context=default
system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Thu May 31 14:06:09 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCTDM/0 "Wildcard TDM410P" (MASTER)
# channel 1, WCTDM/0/0, no module.
# channel 2, WCTDM/0/1, no module.
fxsks=3
echocanceller=mg2,3
fxsks=4
echocanceller=mg2,4
# Global data
loadzone = fr
defaultzone = fr
Si vous avez besoin d'informations summplémentaires, n'hesitez pas à me les demander. Merci d'avance.
je me permet d'écrire sur ce forum pour solliciter une aide de votre part pour ma configuration de mon serveur Asterisk avec une carte Digium et avec comme opérateur Free.
Version d'Asterisk 1.8.13
Version de Freepbx : 2.9.0.12
Carte Digium TDM410P avec 2 FXO (channel 3 et 4 ) et le module Echo
Operateur ADSL/Téléphonique : Free
Mon problème vient des appels entrant qui ne sont pas logués sur le CLI d'Asterisk et qui ne font pas sonner le téléphone. Les appels sortant fonctionnent parfaitement à partir de softphone ou de téléphone IP Cisco.
Voici les différents fichiers de configuration
root@Asterisk-Debian:/etc/asterisk# lsdahdi
### Span 1: WCTDM/0 "Wildcard TDM410P" (MASTER)
1 unknown Reserved
2 unknown Reserved
3 FXO FXSKS (In use) (EC: VPMOCT032 - INACTIVE) RED
4 FXO FXSKS (In use) (EC: VPMOCT032 - INACTIVE)
root@Asterisk-Debian:/etc/asterisk#
chan-dahdi.conf
;General options
[general]
language=fr
[channels]
context=from-pstn
signalling=fxs_ks
usecallerid=yes
hidecallerid=no
callwaiting=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
busydetect=yes
busycount=10
group=0
#include dahdi-channels.conf
dahdi-channels.conf
; Span 1: WCTDM/0 "Wildcard TDM410P" (MASTER)
;;; line="3 WCTDM/0/2 FXSKS (In use) (EC: VPMOCT032 - ACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
callerid=
group=
context=default
;;; line="4 WCTDM/0/3 FXSKS (In use) (EC: VPMOCT032 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 4
callerid=
group=
context=default
system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Thu May 31 14:06:09 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCTDM/0 "Wildcard TDM410P" (MASTER)
# channel 1, WCTDM/0/0, no module.
# channel 2, WCTDM/0/1, no module.
fxsks=3
echocanceller=mg2,3
fxsks=4
echocanceller=mg2,4
# Global data
loadzone = fr
defaultzone = fr
Si vous avez besoin d'informations summplémentaires, n'hesitez pas à me les demander. Merci d'avance.