Probleme :Your call cannot be completed as dial ''solved''
salut, jobtient cet erreur quand j'esseye de faire un appel sortant.
je vous joint mes infos.
pbx*CLI> Sip show peers
Code:
Name/username Host Dyn Nat ACL Port Status
101/101 192.168.1.7 D N A 5940 OK (49 ms)
sipgate/1129201 217.10.79.23 5060 OK (63 ms)
2 sip peers [Monitored: 2 online, 0 offline Unmonitored: 0 online, 0 offline]
-- Remote UNIX connection
-- Remote UNIX connection disconnected
Voici ce que j'ai lors de mon test.
Code:
== Using SIP RTP CoS mark 5
-- Executing [08000556688@from-internal:1] ResetCDR("SIP/101-00000004", "") in new stack
-- Executing [08000556688@from-internal:2] NoCDR("SIP/101-00000004", "") in new stack
-- Executing [08000556688@from-internal:3] Progress("SIP/101-00000004", "") in new stack
-- Executing [08000556688@from-internal:4] Wait("SIP/101-00000004", "1") in new stack
-- Executing [08000556688@from-internal:5] Playback("SIP/101-00000004", "silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer") in new stack
-- <SIP/101-00000004> Playing 'silence/1.gsm' (language 'en')
-- <SIP/101-00000004> Playing 'cannot-complete-as-dialed.gsm' (language 'en')
-- <SIP/101-00000004> Playing 'check-number-dial-again.gsm' (language 'en')
-- Executing [08000556688@from-internal:6] Wait("SIP/101-00000004", "1") in new stack
-- Executing [08000556688@from-internal:7] Congestion("SIP/101-00000004", "20") in new stack
== Spawn extension (from-internal, 08000556688, 7) exited non-zero on 'SIP/101-00000004'
-- Executing [h@from-internal:1] Macro("SIP/101-00000004", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/101-00000004", "1?noautomon") in new stack
-- Goto (macro-hangupcall,s,3)
-- Executing [s@macro-hangupcall:3] NoOp("SIP/101-00000004", "TOUCH_MONITOR_OUTPUT=") in new stack
-- Executing [s@macro-hangupcall:4] GotoIf("SIP/101-00000004", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,7)
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/101-00000004", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,10)
-- Executing [s@macro-hangupcall:10] GotoIf("SIP/101-00000004", "1?theend") in new stack
-- Goto (macro-hangupcall,s,12)
-- Executing [s@macro-hangupcall:12] Hangup("SIP/101-00000004", "") in new stack
== Spawn extension (macro-hangupcall, s, 12) exited non-zero on 'SIP/101-00000004' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/101-00000004'
-- Remote UNIX connection
-- Remote UNIX connection disconnected
infos sip trunck
Code:
General Settings
Trunk Description:
Outbound Caller ID: mon id
CID Options:
Maximum Channels:
Disable Trunk: Disable
Monitor Trunk Failures: Enable
Outgoing Dial Rules
Dial Rules: rien
Dial Rules Wizards:
Outbound Dial Prefix: rien
Outgoing Settings
Trunk Name: sipgate
PEER Details:
disallow=all
allow=ulaw&alaw&g729&alaw&ulaw)
type=peer
fromdomain=sipgate.co.uk
host=sipgate.co.uk
insecure=very
qualify=yes
secret=xxxxx
username=xxxx
Incoming Settings
USER Context: mon id
USER Details:
context=from-trunk
fromuser=mon id
insecure=very
secret= pw
type=user
username=mon id
Registration
Register String:
monid:pw@sipgate.co.uk/monid
Je pense que mon probleme vient du dial plan, jai fait queleque recherche mais ya rien a faire, donc vos info ou tutos sont les bien venus. see ya take care.