Pb de connexion B410P et Ligne T0

[dicus]

Bonjour,

Tout est dit dans le titre !
Pour le moment, j'ai un PABX dont les 4 entrées ISDN T0 sont connectées sur un OneAccess One200 qui lui est connecté au boitier FT via l'uplink. Tout fonctionne bien.

Je veux maintenant retirer le PABX pour le remplacer par mon Asterisk via une B410P. La carte est bien reconnue et affichée dans Freepbx, je branche les 4 cables précédemment mis sur le T0 du PABX sur chaque port de ma carte et les LEDS sont bien en vert fixe. Mais impossible d'appeler ou de recevoir des appels. Voici le CLI lors d 'un appel sur un portable :

  == Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
    -- Executing [006XXXXXXXX@from-internal:1] Macro("SIP/805-00000005", "user-callerid,SKIPTTL,") in new stack
    -- Executing [s@macro-user-callerid:1] Set("SIP/805-00000005", "AMPUSER=805") in new stack
    -- Executing [s@macro-user-callerid:2] GotoIf("SIP/805-00000005", "0?report") in new stack
    -- Executing [s@macro-user-callerid:3] ExecIf("SIP/805-00000005", "1?Set(REALCALLERIDNUM=805)") in new stack
    -- Executing [s@macro-user-callerid:4] Set("SIP/805-00000005", "AMPUSER=805") in new stack
    -- Executing [s@macro-user-callerid:5] Set("SIP/805-00000005", "AMPUSERCIDNAME=InfoTel") in new stack
    -- Executing [s@macro-user-callerid:6] GotoIf("SIP/805-00000005", "0?report") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SIP/805-00000005", "AMPUSERCID=805") in new stack
    -- Executing [s@macro-user-callerid:8] Set("SIP/805-00000005", "CALLERID(all)="InfoTel" <805>") in new stack
    -- Executing [s@macro-user-callerid:9] GotoIf("SIP/805-00000005", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,18)
    -- Executing [s@macro-user-callerid:18] NoOp("SIP/805-00000005", "Using CallerID "InfoTel" <805>") in new stack
    -- Executing [006XXXXXXXX@from-internal:2] Set("SIP/805-00000005", "_NODEST=") in new stack
    -- Executing [006XXXXXXXX@from-internal:3] Macro("SIP/805-00000005", "record-enable,805,OUT,") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SIP/805-00000005", "1?check") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] ExecIf("SIP/805-00000005", "0?MacroExit()") in new stack
    -- Executing [s@macro-record-enable:5] GotoIf("SIP/805-00000005", "0?Group:OUT") in new stack
    -- Goto (macro-record-enable,s,16)
    -- Executing [s@macro-record-enable:16] GotoIf("SIP/805-00000005", "0?IN") in new stack
    -- Executing [s@macro-record-enable:17] ExecIf("SIP/805-00000005", "1?MacroExit()") in new stack
    -- Executing [006XXXXXXXX@from-internal:4] Macro("SIP/805-00000005", "dialout-trunk,2,06XXXXXXXX,,") in new stack
    -- Executing [s@macro-dialout-trunk:1] Set("SIP/805-00000005", "DIAL_TRUNK=2") in new stack
    -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/805-00000005", "0?sub-pincheck,s,1") in new stack
    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/805-00000005", "0?disabletrunk,1") in new stack
    -- Executing [s@macro-dialout-trunk:4] Set("SIP/805-00000005", "DIAL_NUMBER=06XXXXXXXX") in new stack
    -- Executing [s@macro-dialout-trunk:5] Set("SIP/805-00000005", "DIAL_TRUNK_OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:6] Set("SIP/805-00000005", "OUTBOUND_GROUP=OUT_2") in new stack
    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/805-00000005", "1?nomax") in new stack
    -- Goto (macro-dialout-trunk,s,9)
    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/805-00000005", "0?skipoutcid") in new stack
    -- Executing [s@macro-dialout-trunk:10] Set("SIP/805-00000005", "DIAL_TRUNK_OPTIONS=") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/805-00000005", "outbound-callerid,2") in new stack
    -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/805-00000005", "0?Set(CALLERPRES()=)") in new stack
    -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/805-00000005", "0?Set(REALCALLERIDNUM=805)") in new stack
    -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/805-00000005", "1?normcid") in new stack
    -- Goto (macro-outbound-callerid,s,6)
    -- Executing [s@macro-outbound-callerid:6] Set("SIP/805-00000005", "USEROUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:7] Set("SIP/805-00000005", "EMERGENCYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:8] Set("SIP/805-00000005", "TRUNKOUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/805-00000005", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,12)
    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/805-00000005", "0?Set(CALLERID(all)=)") in new stack
    -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/805-00000005", "0?Set(CALLERID(all)=)") in new stack
    -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/805-00000005", "0?Set(CALLERID(all)=)") in new stack
    -- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/805-00000005", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
    -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/805-00000005", "1?AGI(fixlocalprefix)") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
  == fixlocalprefix: Dialpattern 0X. matched. 06XXXXXXXX -> 06XXXXXXXX
    -- <SIP/805-00000005>AGI Script fixlocalprefix completed, returning 0
    -- Executing [s@macro-dialout-trunk:13] Set("SIP/805-00000005", "OUTNUM=06XXXXXXXX") in new stack
    -- Executing [s@macro-dialout-trunk:14] Set("SIP/805-00000005", "custom=AMP") in new stack
    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/805-00000005", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack
    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/805-00000005", "dialout-trunk-predial-hook,") in new stack
    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/805-00000005", "") in new stack
    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/805-00000005", "0?bypass,1") in new stack
    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/805-00000005", "1?customtrunk") in new stack
    -- Goto (macro-dialout-trunk,s,22)
    -- Executing [s@macro-dialout-trunk:22] Set("SIP/805-00000005", "pre_num=AMP:local/") in new stack
    -- Executing [s@macro-dialout-trunk:23] Set("SIP/805-00000005", "the_num=OUTNUM") in new stack
    -- Executing [s@macro-dialout-trunk:24] Set("SIP/805-00000005", "post_num=@distribution-trunks") in new stack

J'ai le fameux message "All circuits are busy". Si quelqu'un a une idée de génie !

J'utilise AsteriskNow 1.7.. et mes appels internes fonctionnent sans pb. Merci