voici le résultat avec
Code:
pri set debug on span 1
Code:
< Protocol Discriminator: Q.931 (8) len=36
< TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent from originator)
< Message Type: SETUP (5)
< [a1]
< Sending Complete (len= 1)
< [04 03 80 90 a3]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
< User information layer 1: A-Law (35)
< [18 03 a9 83 8a]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 Exclusive Dchan: 0
< ChanSel: As indicated in following octets
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 10 Type: CPE]
< [6c 0c 01 83 30 37 39 37 39 34 31 32 33 38]
< Calling Number (len=14) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation allowed of network provided number (3) '0797941238' ]
< [70 04 81 31 32 32]
< Called Number (len= 6) [ Ext: 1 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '122' ]
-- Making new call for cref 2107
Received message for call 0x2aaac8768ab0 on 0x1ef475b0 TEI/SAPI 0/0, call->pri is 0x1ef475b0 TEI/SAPI 0/0
-- Processing Q.931 Call Setup
-- Processing IE 161 (cs0, Sending Complete)
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
q931.c:6966 post_handle_q931_message: Call 2107 enters state 6 (Call Present). Hold state: Idle
q931.c:4594 q931_call_proceeding: Call 2107 enters state 9 (Incoming Call Proceeding). Hold state: Idle
> DL-DATA request
> Protocol Discriminator: Q.931 (8) len=10
> TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
> Message Type: CALL PROCEEDING (2)
TEI=0 Transmitting N(S)=16, window is open V(A)=16 K=7