Limité le nombre d'appel different

[Comdif]

Un petit job pour une agi + une dB et un cron mensuel pas trop compliqué à faire
en tout cas il n'y a rien de tout fait pour ce job

[xana01]

J'utilise PBX in flash Avec proxmox , + l'inteface Freepbx

Es-que avec Freepbx il y a un moyen simple de mettre sa en place .

Sinon avez vous des exemples a me montré

Merci

[fastm3]

J'avais fait un tuto simple de rotation de trunk
http://www.asterisk-france.org/conte...s-avec-freepbx

Pour l'instant, je desire pas publier le script tout fait pour ovh qui lui reutiliserait le meme trunk pour le meme numero. Mais le principe d'integration avec freepbx est expliqué dans le tuto et l'exemple fourni peut suffire deja.
Fastm3.

[xana01]

Merci , c'est vraiment pas mal

par contre je ne comprend pas un truc dans le code

[distribution-trunks]
;trunks are number 1 and 2
exten => _0X..,1,Set(COUNT=${DB(test/count)})
;increment
exten => _0X.,n,SetVar(COUNT=$[${COUNT} + 1])
exten => _0X.,n,SetVar(COUNT=${IF($[ ${COUNT} = 3]?1:${COUNT})})
exten => _0X.,n,Set(DB(test/count)=${COUNT})
exten => _0X.,n,NoOp(Number dialed is ${EXTEN} by trunk pstn ${COUNT})
exten => _0X.,n,Macro(dialout-trunk,${COUNT},${EXTEN},,)
exten => _0X.,n,Macro(outisbusy,)

Peut tu détaillé chaque ligne, je ne comprend pas certaine fonction du code
J'ai fais une outbound qui sort sur se le trunk custom qui s'appel test qui lui a le paramètre

local/$OUTNUM$@distribution-trunks

Par contre cela ne fonctionne pas ,

 -- Executing [0633000001@from-internal:1] Set("SIP/222-0000000d", "TIMEOUT(absolute)=3300") in new stack
Channel will hangup at 2012-03-20 18:32:43.273 GMT.
    -- Executing [0633000001@from-internal:2] NoOp("SIP/222-0000000d", "Calling Out Route: tt") in new stack
    -- Executing [0633000001@from-internal:3] Set("SIP/222-0000000d", "MOHCLASS=default") in new stack
    -- Executing [0633000001@from-internal:4] Set("SIP/222-0000000d", "_NODEST=") in new stack
    -- Executing [0633000001@from-internal:5] Macro("SIP/222-0000000d", "record-enable,,OUT,") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SIP/222-0000000d", "1?check") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] ExecIf("SIP/222-0000000d", "1?MacroExit()") in new stack
    -- Executing [0633000001@from-internal:6] Macro("SIP/222-0000000d", "dialout-trunk,4,0633000001,") in new stack
    -- Executing [s@macro-dialout-trunk:1] Set("SIP/222-0000000d", "DIAL_TRUNK=4") in new stack
    -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/222-0000000d", "0?sub-pincheck,s,1") in new stack
    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/222-0000000d", "0?disabletrunk,1") in new stack
    -- Executing [s@macro-dialout-trunk:4] Set("SIP/222-0000000d", "DIAL_NUMBER=0633000001") in new stack
    -- Executing [s@macro-dialout-trunk:5] Set("SIP/222-0000000d", "DIAL_TRUNK_OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:6] Set("SIP/222-0000000d", "OUTBOUND_GROUP=OUT_4") in new stack
    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/222-0000000d", "1?nomax") in new stack
    -- Goto (macro-dialout-trunk,s,9)
    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/222-0000000d", "0?skipoutcid") in new stack
    -- Executing [s@macro-dialout-trunk:10] Set("SIP/222-0000000d", "DIAL_TRUNK_OPTIONS=T") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/222-0000000d", "outbound-callerid,4") in new stack
    -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/222-0000000d", "0?Set(CALLERPRES()=)") in new stack
    -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/222-0000000d", "1?Set(REALCALLERIDNUM=222)") in new stack
    -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/222-0000000d", "1?normcid") in new stack
    -- Goto (macro-outbound-callerid,s,6)
    -- Executing [s@macro-outbound-callerid:6] Set("SIP/222-0000000d", "USEROUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:7] Set("SIP/222-0000000d", "EMERGENCYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:8] Set("SIP/222-0000000d", "TRUNKOUTCID=hidden") in new stack
    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/222-0000000d", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,12)
    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/222-0000000d", "1?Set(CALLERID(all)=hidden)") in new stack
    -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/222-0000000d", "0?Set(CALLERID(all)=)") in new stack
    -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/222-0000000d", "1?Set(CALLERID(all)=hidden)") in new stack
    -- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/222-0000000d", "1?Set(CALLERPRES()=prohib_passed_screen)") in new stack
    -- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/222-0000000d", "1?sub-flp-4,s,1") in new stack
    -- Executing [s@sub-flp-4:1] ExecIf("SIP/222-0000000d", "1?Return()") in new stack
    -- Executing [s@macro-dialout-trunk:13] Set("SIP/222-0000000d", "OUTNUM=0633000001") in new stack
    -- Executing [s@macro-dialout-trunk:14] Set("SIP/222-0000000d", "custom=AMP") in new stack
    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/222-0000000d", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)T)") in new stack
    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/222-0000000d", "dialout-trunk-predial-hook,") in new stack
    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/222-0000000d", "") in new stack
    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/222-0000000d", "0?bypass,1") in new stack
    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/222-0000000d", "1?customtrunk") in new stack
    -- Goto (macro-dialout-trunk,s,22)
    -- Executing [s@macro-dialout-trunk:22] Set("SIP/222-0000000d", "pre_num=AMP:local/") in new stack
    -- Executing [s@macro-dialout-trunk:23] Set("SIP/222-0000000d", "the_num=OUTNUM") in new stack
    -- Executing [s@macro-dialout-trunk:24] Set("SIP/222-0000000d", "post_num=@distribution-trunks") in new stack
    -- Executing [s@macro-dialout-trunk:25] GotoIf("SIP/222-0000000d", "1?outnum:skipoutnum") in new stack
    -- Goto (macro-dialout-trunk,s,26)
    -- Executing [s@macro-dialout-trunk:26] Set("SIP/222-0000000d", "the_num=0633000001") in new stack
    -- Executing [s@macro-dialout-trunk:27] Dial("SIP/222-0000000d", "local/0633000001@distribution-trunks,300,T") in new stack
    -- Called local/0633000001@distribution-trunks
    -- Executing [0633000001@distribution-trunks:1] Set("Local/0633000001@distribution-trunks-07b6;2", "COUNT=") in new stack
  == Spawn extension (distribution-trunks, 0633000001, 2) exited non-zero on 'Local/0633000001@distribution-trunks-07b6;2'
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [s@macro-dialout-trunk:28] NoOp("SIP/222-0000000d", "Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 0") in new stack
    -- Executing [s@macro-dialout-trunk:29] Goto("SIP/222-0000000d", "s-CHANUNAVAIL,1") in new stack
    -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] Set("SIP/222-0000000d", "RC=0") in new stack
    -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:2] Goto("SIP/222-0000000d", "0,1") in new stack
    -- Goto (macro-dialout-trunk,0,1)
    -- Executing [0@macro-dialout-trunk:1] Goto("SIP/222-0000000d", "continue,1") in new stack
    -- Goto (macro-dialout-trunk,continue,1)
    -- Executing [continue@macro-dialout-trunk:1] GotoIf("SIP/222-0000000d", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,continue,3)
    -- Executing [continue@macro-dialout-trunk:3] NoOp("SIP/222-0000000d", "TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 0 - failing through to other trunks") in new stack
    -- Executing [continue@macro-dialout-trunk:4] Set("SIP/222-0000000d", "CALLERID(number)=") in new stack
    -- Executing [0633000001@from-internal:7] Wait("SIP/222-0000000d", "1") in new stack
    -- Executing [0633000001@from-internal:8] Congestion("SIP/222-0000000d", "20") in new stack
  == Spawn extension (from-internal, 0633000001, 8) exited non-zero on 'SIP/222-0000000d'
    -- Executing [h@from-internal:1] Macro("SIP/222-0000000d", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/222-0000000d", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,4)
    -- Executing [s@macro-hangupcall:4] GotoIf("SIP/222-0000000d", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,7)
    -- Executing [s@macro-hangupcall:7] GotoIf("SIP/222-0000000d", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] Hangup("SIP/222-0000000d", "") in new stack
  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/222-0000000d' in macro 'hangupcall'
  == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/222-0000000d'

Merci

[fastm3]

fait un "database put test count 1" sous cli pour "amorcer"

[distribution-trunks] 
;trunks are number 1 and 2
; on recupere le dernier trunk qui a été utilisé ( on suppose le trunk numero 1 mais ca pourrait etre 5)
; C'est pour cela qu'il faut faire le database set 1 fois en init.
exten => _0X..,1,Set(COUNT=${DB(test/count)}) 
;increment, donc si c'etait le trunk 1, COUNT contient maintenant 2 
exten => _0X.,n,SetVar(COUNT=$[${COUNT} + 1])
; si le trunk est egal à 3 , on repart à 1 sinon on ne fait rien. ( cela est en fait une boucle entre une valeur min et max)
exten => _0X.,n,SetVar(COUNT=${IF($[ ${COUNT} = 3]?1:${COUNT})}) 
;on sauve le dernier trunk qu'on va utiliser pour qu'il soit persistent.
exten => _0X.,n,Set(DB(test/count)=${COUNT})
; on ajoute une trace 
exten => _0X.,n,NoOp(Number dialed is ${EXTEN} by trunk pstn ${COUNT}) 
; on dial le numero avec le trunk qu'on a selectionné.
exten => _0X.,n,Macro(dialout-trunk,${COUNT},${EXTEN},,) 
exten => _0X.,n,Macro(outisbusy,)

C'est un exemple. Il faut adapter avec le numero des trunks dans freepbx que tu veux alterner. Ca ne marchera pas sans cela.

Fastm3

[xana01]

C'est un exemple. Il faut adapter avec le numero des trunks dans freepbx que tu veux alterner. Ca ne marchera pas sans cela.

Fastm3

Excusez moi, j'essaye vraiment de comprendre se code , mais je vois pas ou je dois définir la COUNT , car mes trunk commence a partir de 2

Merci

[xana01]

Âpres avoir essayé a plusieurs reprise je vois vraiment pas se qui cloche .

Je voudrais savoir fastm3 dans ton tuto tu serais pas trompé dans la ligne

"Ici le numero de trunk est le numero 2. On pourrais vérifier cela dans /etc/asterisk/sip_additionnal.conf"

Car pour vérifier chez moi c'est le fichier extensions_additional.conf
Avec les lignes
OUT_1 = SIP/MAISONSIP
OUTCID_1 = 0900000059

Ah moins que sa soit moi qui comprend vraiment rien de rien

Sinon je tiens vraiment à UP se poste car la après avoir lu plusieurs livre j'ai toujours rien qui se passe, J'ai bien mon COUNT=1 , mais rien numérote c'est sa que je comprend pas , J'ai une erreur

NoOp("SIP/222-00000040", "Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 0")

Je la comprend pas cette erreur