Voici les fichiers avant l'ajout du module B400M :

/etc/asterisk/dahdi-channels.conf :

Code:
; Autogenerated by /usr/sbin/dahdi_genconf on Mon Jul 26 12:30:22 2010
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: WCTDM/0 "HA8-0000 Board 1" (MASTER)
language=fr
;;; line="5 WCTDM/0/4 FXSKS  (In use) (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 5
callerid=
group=
context=default

;;; line="6 WCTDM/0/5 FXSKS  (In use) (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 6
callerid=
group=
context=default
/etc/dahdi/system.conf :

Code:
# Autogenerated by /usr/sbin/dahdi_genconf on Mon Jul 26 12:30:22 2010
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCTDM/0 "HA8-0000 Board 1" (MASTER)
# channel 1, WCTDM/0/0, no module.
# channel 2, WCTDM/0/1, no module.
# channel 3, WCTDM/0/2, no module.
# channel 4, WCTDM/0/3, no module.
fxsks=5
echocanceller=mg2,5
fxsks=6
echocanceller=mg2,6
# channel 7, WCTDM/0/6, no module.
# channel 8, WCTDM/0/7, no module.

# Global data

loadzone        = fr
defaultzone     = fr
Et quand je fais un dahdi_genconf voici les nouveaux fichiers :

/etc/asterisk/dahdi-channels.conf :

Code:
; Autogenerated by /usr/sbin/dahdi_genconf on Wed Oct 31 08:19:21 2012
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: WCBRI/0/0 "HA8-0000 Board 1" (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63

; Span 2: WCBRI/0/1 "HA8-0000 Board 1"
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 4-5
context = default
group = 63

; Span 3: WCBRI/0/2 "HA8-0000 Board 1"
group=0,13
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 7-8
context = default
group = 63

; Span 4: WCBRI/0/3 "HA8-0000 Board 1"
group=0,14
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 10-11
context = default
group = 63

; Span 5: WCTDM/0 "HA8-0000 Board 1"
;;; line="17 WCTDM/0/4 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 17
callerid=
group=
context=default

;;; line="18 WCTDM/0/5 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 18
callerid=
group=
context=default
/etc/dahdi/system.conf :

Code:
# Autogenerated by /usr/sbin/dahdi_genconf on Wed Oct 31 08:19:21 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCBRI/0/0 "HA8-0000 Board 1" (MASTER)
span=1,1,0,ccs,ami,term,te
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2

# Span 2: WCBRI/0/1 "HA8-0000 Board 1"
span=2,2,0,ccs,ami,term,te
# termtype: te
bchan=4-5
hardhdlc=6
echocanceller=mg2,4-5

# Span 3: WCBRI/0/2 "HA8-0000 Board 1"
span=3,3,0,ccs,ami,term,te
# termtype: te
bchan=7-8
hardhdlc=9
echocanceller=mg2,7-8

# Span 4: WCBRI/0/3 "HA8-0000 Board 1"
span=4,4,0,ccs,ami,term,te
# termtype: te
bchan=10-11
hardhdlc=12
echocanceller=mg2,10-11

# Span 5: WCTDM/0 "HA8-0000 Board 1"
# channel 13, WCTDM/0/0, no module.
# channel 14, WCTDM/0/1, no module.
# channel 15, WCTDM/0/2, no module.
# channel 16, WCTDM/0/3, no module.
fxsks=17
echocanceller=mg2,17
fxsks=18
echocanceller=mg2,18
# channel 19, WCTDM/0/6, no module.
# channel 20, WCTDM/0/7, no module.

# Global data

loadzone        = fr
defaultzone     = fr
Et rien d'autre n'a changé, mes prises sont toujours branchées sur les ports 5 et 6 de la carte.
Merci pour votre aide.