Je viens de tester l'exemple de Al3x et de F6HQZ mais rien n'y fait


example d'Al3x:
Code:
 Using SIP RTP CoS mark 5
    -- Executing [00033625081954@from-sip-cyril:1] NoOp("SIP/7034-000000fa", "Outbound international call to number ==> 0033625081954") in new stack
    -- Executing [00033625081954@from-sip-cyril:2] NoOp("SIP/7034-000000fa", "0") in new stack
    -- Executing [00033625081954@from-sip-cyril:3] Set("SIP/7034-000000fa", "CALLERID(number)=323217034") in new stack
    -- Executing [00033625081954@from-sip-cyril:4] SetCallerPres("SIP/7034-000000fa", "prohib") in new stack
    -- Executing [00033625081954@from-sip-cyril:5] Dial("SIP/7034-000000fa", "DAHDI/g11/0033625081954") in new stack
PRI Span: 1 -- Making new call for cref 32832
    -- Requested transfer capability: 0x00 - SPEECH
PRI Span: 1 
PRI Span: 1 > DL-DATA request
PRI Span: 1 > Protocol Discriminator: Q.931 (8)  len=45
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 64/0x40) (Sent from originator)
PRI Span: 1 > Message Type: SETUP (5)
PRI Span: 1 TEI=0 Transmitting N(S)=56, window is open V(A)=56 K=7
PRI Span: 1 
PRI Span: 1 > Protocol Discriminator: Q.931 (8)  len=45
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 64/0x40) (Sent from originator)
PRI Span: 1 > Message Type: SETUP (5)
PRI Span: 1 > [04 03 80 90 a3]
PRI Span: 1 > Bearer Capability (len= 5) [ Ext: 1  Coding-Std: 0  Info transfer capability: Speech (0)
PRI Span: 1 >                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
PRI Span: 1 >                                User information layer 1: A-Law (35)
PRI Span: 1 > [18 03 a1 83 82]
PRI Span: 1 > Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)  Spare: 0  Preferred  Dchan: 0
PRI Span: 1 >                       ChanSel: As indicated in following octets
PRI Span: 1 >                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
PRI Span: 1 >                       Ext: 1  Channel: 2 Type: CPE]
PRI Span: 1 > [6c 0b 21 81 33 32 33 32 31 37 30 33 34]
PRI Span: 1 > Calling Party Number (len=13) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
PRI Span: 1 >                                 Presentation: Presentation allowed, User-provided, verified and passed (1)  '323217034' ]
PRI Span: 1 > [70 0e 80 30 30 33 33 36 32 35 30 38 31 39 35 34]
PRI Span: 1 > Called Party Number (len=16) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0)  '0033625081954' ]
PRI Span: 1 > [a1]
PRI Span: 1 > Sending Complete (len= 1)
2ème example d'Al3x avec callerid 0:
Code:
Executing [00033625081954@from-sip-cyril:1] NoOp("SIP/7034-000000fc", "Outbound international call to number ==> 0033625081954") in new stack
    -- Executing [00033625081954@from-sip-cyril:2] NoOp("SIP/7034-000000fc", "0") in new stack
    -- Executing [00033625081954@from-sip-cyril:3] Set("SIP/7034-000000fc", "CALLERID(number)=0000000000") in new stack
    -- Executing [00033625081954@from-sip-cyril:4] SetCallerPres("SIP/7034-000000fc", "prohib") in new stack
    -- Executing [00033625081954@from-sip-cyril:5] Dial("SIP/7034-000000fc", "DAHDI/g11/0033625081954") in new stack
PRI Span: 1 -- Making new call for cref 32834
    -- Requested transfer capability: 0x00 - SPEECH
PRI Span: 1 
PRI Span: 1 > DL-DATA request
PRI Span: 1 > Protocol Discriminator: Q.931 (8)  len=46
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 66/0x42) (Sent from originator)
PRI Span: 1 > Message Type: SETUP (5)
PRI Span: 1 TEI=0 Transmitting N(S)=64, window is open V(A)=64 K=7
PRI Span: 1 
PRI Span: 1 > Protocol Discriminator: Q.931 (8)  len=46
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 66/0x42) (Sent from originator)
PRI Span: 1 > Message Type: SETUP (5)
PRI Span: 1 > [04 03 80 90 a3]
PRI Span: 1 > Bearer Capability (len= 5) [ Ext: 1  Coding-Std: 0  Info transfer capability: Speech (0)
PRI Span: 1 >                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
PRI Span: 1 >                                User information layer 1: A-Law (35)
PRI Span: 1 > [18 03 a1 83 81]
PRI Span: 1 > Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)  Spare: 0  Preferred  Dchan: 0
PRI Span: 1 >                       ChanSel: As indicated in following octets
PRI Span: 1 >                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
PRI Span: 1 >                       Ext: 1  Channel: 1 Type: CPE]
PRI Span: 1 > [6c 0c 21 81 30 30 30 30 30 30 30 30 30 30]
PRI Span: 1 > Calling Party Number (len=14) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
PRI Span: 1 >                                 Presentation: Presentation allowed, User-provided, verified and passed (1)  '0000000000' ]
PRI Span: 1 > [70 0e 80 30 30 33 33 36 32 35 30 38 31 39 35 34]
PRI Span: 1 > Called Party Number (len=16) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0)  '0033625081954' ]
PRI Span: 1 > [a1]
PRI Span: 1 > Sending Complete (len= 1)
test de F6HQZ:
Code:
 Parsing '/etc/asterisk/unistim.conf':   == Found
  == Using SIP RTP CoS mark 5
    -- Executing [00033625081954@from-sip-cyril:1] NoOp("SIP/7034-000000fe", "Outbound international call to number ==> 0033625081954") in new stack
    -- Executing [00033625081954@from-sip-cyril:2] NoOp("SIP/7034-000000fe", "0") in new stack
    -- Executing [00033625081954@from-sip-cyril:3] Set("SIP/7034-000000fe", "CALLERID(number)=000ABCD000") in new stack
    -- Executing [00033625081954@from-sip-cyril:4] SetCallerPres("SIP/7034-000000fe", "prohib") in new stack
    -- Executing [00033625081954@from-sip-cyril:5] Dial("SIP/7034-000000fe", "DAHDI/g11/0033625081954") in new stack
PRI Span: 1 -- Making new call for cref 32835
    -- Requested transfer capability: 0x00 - SPEECH
PRI Span: 1 
PRI Span: 1 > DL-DATA request
PRI Span: 1 > Protocol Discriminator: Q.931 (8)  len=46
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 67/0x43) (Sent from originator)
PRI Span: 1 > Message Type: SETUP (5)
PRI Span: 1 TEI=0 Transmitting N(S)=72, window is open V(A)=72 K=7
PRI Span: 1 
PRI Span: 1 > Protocol Discriminator: Q.931 (8)  len=46
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 67/0x43) (Sent from originator)
PRI Span: 1 > Message Type: SETUP (5)
PRI Span: 1 > [04 03 80 90 a3]
PRI Span: 1 > Bearer Capability (len= 5) [ Ext: 1  Coding-Std: 0  Info transfer capability: Speech (0)
PRI Span: 1 >                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
PRI Span: 1 >                                User information layer 1: A-Law (35)
PRI Span: 1 > [18 03 a1 83 81]
PRI Span: 1 > Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)  Spare: 0  Preferred  Dchan: 0
PRI Span: 1 >                       ChanSel: As indicated in following octets
PRI Span: 1 >                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
PRI Span: 1 >                       Ext: 1  Channel: 1 Type: CPE]
PRI Span: 1 > [6c 0c 21 81 30 30 30 41 42 43 44 30 30 30]
PRI Span: 1 > Calling Party Number (len=14) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
PRI Span: 1 >                                 Presentation: Presentation allowed, User-provided, verified and passed (1)  '000ABCD000' ]
PRI Span: 1 > [70 0e 80 30 30 33 33 36 32 35 30 38 31 39 35 34]
PRI Span: 1 > Called Party Number (len=16) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0)  '0033625081954' ]
PRI Span: 1 > [a1]
PRI Span: 1 > Sending Complete (len= 1)

peu importe ce que j'indique pour "prohiber" le CLI le paramètre présentation est toujours avec la même valeur:
Presentation allowed, User-provided, verified and passed

Je pense que c'est peut-être un bug car la pas moyen de modifier ce paramètre de présentation.

Cordialement.