hello les amis,
un de nos clients (un docteur) ne voulait de double appel.
Facile, opérateur téléphonique annuler signalisation double appel fini merci au revoir question suivante!
MAIS
l'autre jour réinitialisation de la ligne et bardaff réactivation du double appel
coup de fil du docteur pas content
là je me dis stop on va chercher dans trixbox comment le faire soi-même
je trouve dans le grandstream gxp2000 le paramètre qui empêche les doubles appels test en interne nickel
mise en production chez le doc: bardaff le deuxième appel est routé sur le message des heures d'ouverture des time conditions!!!
je regarde les logs afin de voir comment ce fait-ce mais non! je ne vois pas!


trixbox1*CLI>
> dialparties.agi: Extension 711 has call screening off
trixbox1*CLI>
-- dialparties.agi: Extension 711 cf is disabled
trixbox1*CLI>
-- dialparties.agi: Extension 711 do not disturb is disabled
[Ktrixbox1*CLI>
> dialparties.agi: extnum 711 has: cw: 1; hascfb: 0 [] hascfu: 0 []
> dialparties.agi: ExtensionState: 1
trixbox1*CLI>
dialparties.agi: Extension 711 has call waiting enabled with state: 1
[Ktrixbox1*CLI>
-- dialparties.agi: dbset CALLTRACE/711 to 003281849079
[Ktrixbox1*CLI>
-- dialparties.agi: Filtered ARG3: 711
trixbox1*CLI>
== Manager 'admin' logged off from 127.0.0.1
trixbox1*CLI>
-- AGI Script dialparties.agi completed, returning 0
[Ktrixbox1*CLI>
-- Executing [s@macro-dial:7] Dial("SIP/5060-b751a4e0", "SIP/711|120|tr") in new stack
trixbox1*CLI>
-- Called 711
trixbox1*CLI>
-- Got SIP response 486 "Busy" back from 192.168.1.242
trixbox1*CLI>
-- SIP/711-09385e28 is busy
== Everyone is busy/congested at this time (1:1/0/0)
-- Executing [s@macro-dial:8] Set("SIP/5060-b751a4e0", "DIALSTATUS=BUSY") in new stack
-- Executing [s@macro-dial:9] GosubIf("SIP/5060-b751a4e0", "0?BUSY|1") in new stack
-- Executing [s@macro-exten-vm:10] GotoIf("SIP/5060-b751a4e0", "0?exit|return") in new stack
-- Executing [s@macro-exten-vm:11] Set("SIP/5060-b751a4e0", "SV_DIALSTATUS=BUSY") in new stack
-- Executing [s@macro-exten-vm:12] Gos ubIf("SIP/5060-b751a4e0", "0?docfu|1") in new stack
-- Executing [s@macro-exten-vm:13] GosubIf("SIP/5060-b751a4e0", "0?docfb|1") in new stack
[Ktrixbox1*CLI>
-- Executing [s@macro-exten-vm:14] Set("SIP/5060-b751a4e0", "DIALSTATUS=BUSY") in new stack
[Ktrixbox1*CLI>
-- Executing [s@macro-exten-vm:15] NoOp("SIP/5060-b751a4e0", "Voicemail is 711") in new stack
-- Executing [s@macro-exten-vm:16] GotoIf("SIP/5060-b751a4e0", "0?s-BUSY|1") in new stack
-- Executing [s@macro-exten-vm:17] NoOp("SIP/5060-b751a4e0", "Sending to Voicemail box 711") in new stack
-- Executing [s@macro-exten-vm:18] Macro("SIP/5060-b751a4e0", "vm|711|BUSY|") in new stack
-- Executing [s@macro-vm:1] Macro("SIP/5060-b751a4e0", "user-callerid|SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/5060-b751a4e0", "AMPUSER=003281849079") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/5060-b751a4e0", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/5060-b751a4e0", "0|Set|REALCALLERIDNUM=003281849079") in n ew stack
-- Executing [s@macro-user-callerid:4] Set("SIP/5060-b751a4e0", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/5060-b751a4e0", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/5060-b751a4e0", "1?report") in new stack
-- Goto (macro-user-callerid,s,11)
-- Executing [s@macro-user-callerid:11] GotoIf("SIP/5060-b751a4e0", "1?continue") in new stack
-- Goto (macro-user-callerid,s,20)
-- Executing [s@macro-use r-callerid:20] NoOp("SIP/5060-b751a4e0", "Using CallerID "003281849079" <003281849079>") in new stack
-- Executing [s@macro-vm:2] Set("SIP/5060-b751a4e0", "VMGAIN=""") in new stack
-- Executing [s@macro-vm:3] GotoIf("SIP/5060-b751a4e0", "1?vmx|1") in new stack
-- Goto (macro-vm,vmx,1)
-- Executing [vmx@macro-vm:1] GotoIf("SIP/5060-b751a4e0", "0?s-BUSY|1") in new stack
-- Executing [vmx@macro-vm:2] Set("SIP/5060-b751a4e0", "MODE=busy") in new stack
-- Executing [vmx@macro-vm:3] GotoIf("SIP/5060-b751a4e0", "1?notdirect") in new stack
-- Goto (macro-vm,vmx,5)
-- Executing [vmx@macro-vm:5] NoOp("SIP/5060-b751a4e0", "Checking if ext 711 is enabled: blocked") in new stack
-- Executing [vmx@macro-vm:6] GotoIf("SIP/5060-b751a4e0", "1?s-BUSY|1") in new stack
-- Goto (macro-vm,s-BUSY,1)
-- Executing [s-BUSY@macro-vm:1] NoOp("SIP/5060-b751a4e0", "BUSY voicemail") in new stack
-- Executing [s-BUSY@macro-vm:2] Macro("SIP/5060-b751a4e0", "get-vmcontext|711") in new stack
-- Executing [s@macro-get-vmcontext:1] Set("SIP/5060-b751a4e0", "VMCONTEXT=default") in new stack
-- Executing [s@macro-get-vmcontext:2] GotoIf("SIP/5060-b751a4e0", "0?200:300") in new stack
-- Goto (macro-get-vmcontext,s,300)
-- Executing [s@macro-get-vmcontext:300] NoOp("SIP/5060-b751a4e0", "") in new stack
-- Executing [s-BUSY@macro-vm:3] VoiceMail("SIP/5060-b751a4e0", "711@default |sb") in new stack
trixbox1*CLI>
-- <SIP/5060-b751a4e0> Playing '/var/spool/asterisk/voicemail/default/711/temp' (language 'en')
trixbox1*CLI>
-- <SIP/5060-b751a4e0> Playing 'beep' (language 'en')
trixbox1*CLI>
-- Recording the message
trixbox1*CLI>
-- x=0, open writing: /var/spool/asterisk/voicemail/default/711/tmp/YmG2tD format: wav49, 0x9383cc8
trixbox1*CLI>
-- x=1, open writing: /var/spool/asterisk/voicemail/default/711/tmp/YmG2tD format: wav, 0x9388b08
trixbox1*CLI>
== Spawn extension (macro-dial, s, 7) exited non-zero on 'SIP/5060-b7500858' in macro 'dial'
[Ktrixbox1*CLI>
== Spawn extension (macro-dial, s, 7) exited non-zero on 'SIP/5060-b7500858' in macro 'exten-vm'
== Spawn extension (macro-dial, s, 7) exited non-zero on 'SIP/5060-b7500858'
-- Executing [h@macro-dial:1] Macro("SIP/5060-b7500858", "hangupcall") in new stack
trixbox1*CLI>
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/5060-b7500858", "vw") in new stack
trixbox1*CLI>
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/5060-b7500858", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/5060-b7500858", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/5060-b7500858", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/5060-b7500858", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangu pcall:11] Hangup("SIP/5060-b7500858", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/5060-b7500858' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/5060-b7500858'
-- User hung up
trixbox1*CLI>
== Spawn extension (macro-vm, s-BUSY, 3) exited non-zero on 'SIP/5060-b751a4e0' in macro 'vm'
trixbox1*CLI>
== Spawn extension (macro-vm, s-BUSY, 3) exited non-zero on 'SIP/5060-b751a4e0' in macro 'exten-vm'
trixbox1*CLI>
== Spawn extension (macro-vm, s-BUSY, 3) exited non-zero on 'SIP/5060-b751a4e0'

pas le feu au lac j'ai désactivé de nouveau che le provider mais ça m'intrigue quand m^meme