Subitement aucune tonnalité sur les lignes

[alexfos]

Voici mon fichier sip.conf avant la modification du port:

;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;

[general]

; These files will all be included in the [general] context
;
#include sip_general_additional.conf

;sip_general_custom.conf is the proper file location for placing any sip general
;options that you might need set. For example: enable and force the sip jitterbuffer.
;If these settings are desired they should be set the sip_general_custom.conf file.
;
; jbenable=yes
; jbforce=yes
;
;It is also the proper place to add the lines needed for sip nat\\\'ing when going
;through a firewall. For nat\\\'ing you\\\'d need to add the following lines:
; nat=yes , externip= , localhost= , and optionally fromdomain= .
;
#include sip_general_custom.conf

;sip_nat.conf is here for legacy support reasons and for those that upgrade
;from previous versions. If you have this file with lines in it please make
;sure they are not duplicated in sip_general_custom.conf, if so remove them
;from sip_nat.conf as sip_general_custom.conf will have precedence.
#include sip_nat.conf

;sip_registrations_custom.conf is for any customizations you might need to do to
;the automatically generated registrations that FreePBX makes.
;
#include sip_registrations_custom.conf
#include sip_registrations.conf

; These files should all be expected to come after the [general] context
;
#include sip_custom.conf
#include sip_additional.conf

;sip_custom_post.conf If you have extra parameters that are needed for a
;extension to work to for example, those go here. So you have extension
;1000 defined in your system you start by creating a line [1000](+) in this
;file. Then on the next line add the extra parameter that is needed.
;When the sip.conf is loaded it will append your additions to the end of
;that extension.
;
#include sip_custom_post.conf

et apres avoir spécifier le port 5222:

;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;

[general]
port=5222
bindport=5222
; These files will all be included in the [general] context
;
#include sip_general_additional.conf

;sip_general_custom.conf is the proper file location for placing any sip general
;options that you might need set. For example: enable and force the sip jitterbuffer.
;If these settings are desired they should be set the sip_general_custom.conf file.
;
; jbenable=yes
; jbforce=yes
;
;It is also the proper place to add the lines needed for sip nat\\\'ing when going
;through a firewall. For nat\\\'ing you\\\'d need to add the following lines:
; nat=yes , externip= , localhost= , and optionally fromdomain= .
;
#include sip_general_custom.conf

;sip_nat.conf is here for legacy support reasons and for those that upgrade
;from previous versions. If you have this file with lines in it please make
;sure they are not duplicated in sip_general_custom.conf, if so remove them
;from sip_nat.conf as sip_general_custom.conf will have precedence.
#include sip_nat.conf

;sip_registrations_custom.conf is for any customizations you might need to do to
;the automatically generated registrations that FreePBX makes.
;
#include sip_registrations_custom.conf
#include sip_registrations.conf

; These files should all be expected to come after the [general] context
;
#include sip_custom.conf
#include sip_additional.conf

;sip_custom_post.conf If you have extra parameters that are needed for a
;extension to work to for example, those go here. So you have extension
;1000 defined in your system you start by creating a line [1000](+) in this
;file. Then on the next line add the extra parameter that is needed.
;When the sip.conf is loaded it will append your additions to the end of
;that extension.
;
#include sip_custom_post.conf

je spécifie que mes extensions s'enregistre plutot dans le fichier sip_additional.conf, voici un extrait:

[3333]
type=friend
secret=3333
qualify=yes
port=5222
pickupgroup=
nat=yes
mailbox=3333@device
host=dynamic
dtmfmode=rfc2833
dial=SIP/3333
context=from-internal
canreinvite=no
callgroup=
callerid=device <3333>
accountcode=
call-limit=50

[cedricscha]

je déplace ton post dans la catégorie distribution packagée, tu auras, peut etre plus de réponse la bas.