Ok je viens de lire cela !
Executing [00298337600@users:1] Dial("SIP/13-0000021d", "SIP/0298337600@ovh-out,,r")
Tu peux changer ton dialplan et faire un Dial avec SIP/ovh-out/0298337600, ta syntaxe me paraît assez bizarre.
Ok je viens de lire cela !
Executing [00298337600@users:1] Dial("SIP/13-0000021d", "SIP/0298337600@ovh-out,,r")
Tu peux changer ton dialplan et faire un Dial avec SIP/ovh-out/0298337600, ta syntaxe me paraît assez bizarre.
Découvrez Wazo sous licence GPLv3 et accessible pour tous : http://www.wazo.community
Blog Wazo : http://blog.wazo.community
Wazo est un fork de XiVO.
Suivez moi sur Twitter !
Hm j'ai du mal a comprendre ce que je dois faire.
J'ai ça dans mes extensions:
Cette syntaxe ne serait plsu correcte pour la version 11 ? Si je comprend bien de devrait virer les ",,r" ?Code:[outgoing] exten => _0.,1,Dial(SIP/${EXTEN:1}@ovh-out,,r)
Code:[outgoing] exten => _0.,1,Dial(SIP/ovh-out/${EXTEN:1},,r)
Fait comme ceci puis un dialplan reload.
Découvrez Wazo sous licence GPLv3 et accessible pour tous : http://www.wazo.community
Blog Wazo : http://blog.wazo.community
Wazo est un fork de XiVO.
Suivez moi sur Twitter !
Ah j'avais rechargé la page ... et ton message n'était pas là pendant les tests.
Je retente avec : exten => _0.,1,Dial(SIP/ovh-out/${EXTEN:1},,r)
Je retombe sur l'erreur que j'avais au début donc mon soucis doit être purement réseau ...
Quand je regarde les appels reçu on voit qu'ils passent une "probation" mais pas les appels sortant.
Code:Connected to Asterisk 11.7.0~dfsg-1+b1 currently running on ipbx-v2 (pid = 19988) == Using SIP RTP CoS mark 5 -- Executing [00603357850@users:1] Dial("SIP/34-00000000", "SIP/ovh-out/0603357850,,r") in new stack == Using SIP RTP CoS mark 5 -- Called SIP/ovh-out/0603357850 > Saved useragent "C610 IP/42.075.00.000.000" for peer 31 [Mar 13 17:01:23] WARNING[20021]: chan_sip.c:4175 retrans_pkt: Retransmission timeout reached on transmission 04e06f5c382749ed035a740c48cfaacf@80.12.90.15:5060 for seqno 102 (Critical Request) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6400ms with no response [Mar 13 17:01:23] WARNING[20021]: chan_sip.c:4204 retrans_pkt: Hanging up call 04e06f5c382749ed035a740c48cfaacf@80.12.90.15:5060 - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). == Everyone is busy/congested at this time (1:0/0/1)
Mouais spécial par exemple ... En tout cas avec ce qu'on voit oui, maintenant pourquoi il fait cela c'est autre chose. Vraiment faut que tu lances du tcpdump pour voir ce qu'il se passe, mais j'ai l'impression que tu n'as pas la maîtrise de cela vu ce que tu as écrit auparavant. En tout cas pour moi c'est pas un souci Asterisk en tant que tel, tu as un autre truc qui c'est passé. Un firewall sur le serveur ?
iptables -L -n ?
Découvrez Wazo sous licence GPLv3 et accessible pour tous : http://www.wazo.community
Blog Wazo : http://blog.wazo.community
Wazo est un fork de XiVO.
Suivez moi sur Twitter !
comme le dit le message:
no reply to our critical packet (see https://wiki.asterisk.org/wiki/displ...etransmissions)
le doc indiqué est pas mal à lire.... c'est un problème typique de réseau - un paquet n'est pas acquitté correctement, et bye-bye... pourquoi, ca c'est compliqué... pbm de firewall ? je doute que tu n'en aies pas, ou alors donne moi vite ton ip que je te pirate avant les quelqu'un d'autre.... quoique, en cherchant dans les messages, j'ai trouvé ton ip et tes trois caméras - cuisine, openspace, entree....
Sécurisez votre asterisk, lisez ce post du forum: http://www.asterisk-france.org/showt...-recapitulatif et votre patton: http://www.asterisk-france.org/threa...tage-via-tiers - comprenez le nat : http://www.asterisk-france.org/threa...dio-pas-de-son
J'ai essayer de changer la syntaxe et l'erreur est différente.
Code:-- Executing [00158181010@users:1] Dial("SIP/13-00000002", "SIP/0158181010/ovh-out") in new stack [Mar 13 16:57:36] WARNING[19899][C-00000002]: chan_sip.c:6160 create_addr: Purely numeric hostname (0158181010), and not a peer--rejecting! [Mar 13 16:57:36] WARNING[19899][C-00000002]: app_dial.c:2437 dial_exec_full: Unable to create channel of type 'SIP' (cause 20 - Subscriber absent) == Everyone is busy/congested at this time (1:0/0/1) -- Auto fallthrough, channel 'SIP/13-00000002' status is 'CHANUNAVAIL' ipbx-v2*CLI> exit Asterisk cleanly ending (0). Executing last minute cleanups ipbx-v2:/etc/asterisk# nano extensions.conf ipbx-v2:/etc/asterisk# /etc/init.d/asterisk restart Stopping Asterisk PBX: asterisk. Starting Asterisk PBX: asterisk. ipbx-v2:/etc/asterisk# asterisk -rvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Privilege escalation protection disabled! See https://wiki.asterisk.org/wiki/x/1gKfAQ for more details. Asterisk 11.7.0~dfsg-1+b1, Copyright (C) 1999 - 2013 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 11.7.0~dfsg-1+b1 currently running on ipbx-v2 (pid = 19920) == Using SIP RTP CoS mark 5 -- Executing [00603357850@users:1] Dial("SIP/34-00000000", "SIP/0603357850/ovh-out,,r") in new stack [Mar 13 16:58:00] WARNING[19967][C-00000000]: chan_sip.c:6160 create_addr: Purely numeric hostname (0603357850), and not a peer--rejecting! [Mar 13 16:58:00] WARNING[19967][C-00000000]: app_dial.c:2437 dial_exec_full: Unable to create channel of type 'SIP' (cause 20 - Subscriber absent) == Everyone is busy/congested at this time (1:0/0/1) -- Auto fallthrough, channel 'SIP/34-00000000' status is 'CHANUNAVAIL' > Saved useragent "C610 IP/42.075.00.000.000" for peer 33