Bonjour la communauté,

J'ai deux serveurs Elastix NLX4000 avec chacune une carte TE131/TE133
Je les ai configurés, je pouvais appelé et recevoir des appels à travers une E1. (La ligne est placé sur un seul serveur)
Mais ce matin j'arrive rien ne marche plus.
Dans la console j'ai :
Code:
[2016-06-28 06:13:20] WARNING[10307][C-00000000]: app_dial.c:2437 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 34 - Circuit/channel congestion)
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing [s@macro-dialout-trunk:23] NoOp("SIP/8000-00000000", "Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 34") in new stack
J'ai redémarré les dahdi, asterisk mais rien. Avec la ligne E1 branchée ou pas ,la commande dahdi show status me donne
Code:
elx*CLI> dahdi show status
Description                              Alarms  IRQ    bpviol CRC    Fra Codi Options  LBO
Wildcard TE131/TE133 Card 0              BLU/RED 0      0      0      CCS HDB3          0 db (CSU)/0-133 feet (DSX-1)
elx*CLI>
Sans avoir branché la ligne, je devais avoir Alarm OK mais ce n'est ps le cas. Et ce qui est étrange, c'est le même problème avec le second serveur.

Quand je redémarre, et je vais sur l'interface graphique, les canaux sont verts ce qui signifie: Et quand je branche le ligne, canaux virent au rouge, ce qui signife " Canal détecté et utilisé", mais la commande indique toujours Alarms RED. Et quand je branche le ligne, canaux virent au rouge, ce qui signife " Canal détecté et non utilisé"

J'ai vérifié si les cartes étaient détectées par le système, avec dmesg et le fichier /var/log/messages, tout semble ok.
Code:
wcte13xp 0000:04:00.0: setting latency timer to 64
wcte13xp 0000:04:00.0: Firmware version: 780019
wcte13xp 0000:04:00.0: FALC version: 5
wcte13xp 0000:04:00.0: Setting up global serial parameters for E1
wcte13xp 0000:04:00.0: Echo cancellation for 32 channels
wcte13xp 0000:04:00.0: Reset octasic
wcte13xp 0000:04:00.0: VPM450: Present and operational servicing 1 span
wcte13xp 0000:04:00.0: Found a Wildcard TE131/TE133 (SN: 1TE133F - DF04151699553 - B1 - 20150422)
dahdi_devices pci:0000:04:00.0: local span 1 is already assigned span 1
wcte13xp 0000:04:00.0: Span configured for CCS/HDB3
wcte13xp 0000:04:00.0: Calling startup (flags is 4099)
wcte13xp 0000:04:00.0: Setting yellow alarm
drbd: initialized. Version: 8.3.15 (api:88/proto:86-97)
drbd: GIT-hash: 0ce4d235fc02b5c53c1c52c53433d11a694eab8c build by mockbuild@builder10.centos.org, 2013-03-27 16:01:26
drbd: registered as block device major 147
drbd: minor_table @ 0xffff810129a74a80
wcte13xp 0000:04:00.0: Span configured for CCS/HDB3/CRC4
wcte13xp 0000:04:00.0: Calling startup (flags is 4099)
wcte13xp 0000:04:00.0: AIS alarm detected
wcte13xp 0000:04:00.0: Span configured for CCS/HDB3
wcte13xp 0000:04:00.0: Calling startup (flags is 4099)
/var/log/messages (setting Yellow alarm , je ne sais pas si c'est normal)

Code:
Jun 28 12:05:15 elx kernel: wcte13xp 0000:04:00.0: Firmware version: 780019
Jun 28 12:05:15 elx kernel: wcte13xp 0000:04:00.0: FALC version: 5
Jun 28 12:05:15 elx kernel: wcte13xp 0000:04:00.0: Setting up global serial parameters for E1
Jun 28 12:05:15 elx kernel: wcte13xp 0000:04:00.0: Echo cancellation for 32 channels
Jun 28 12:05:15 elx kernel: wcte13xp 0000:04:00.0: Reset octasic
Jun 28 12:05:16 elx kernel: wcte13xp 0000:04:00.0: VPM450: Present and operational servicing 1 span
Jun 28 12:05:16 elx kernel: wcte13xp 0000:04:00.0: Found a Wildcard TE131/TE133 (SN: 1TE133F - DF04151699553 - B1 - 20150422)
Jun 28 12:05:16 elx 'dahdi_handle_device'[2660]: add: /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/pci:0000:04:00.0
Jun 28 12:05:16 elx 'dahdi_handle_device'[2663]: auto_assign_spans=1. Skip /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/pci:0000:04:00.0
Jun 28 12:05:17 elx 'dahdi_span_config'[2676]: add: /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/pci:0000:04:00.0/span-1
Jun 28 12:05:17 elx 'dahdi_span_config'[2684]: auto_assign_spans=1. Skip /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/pci:0000:04:00.0/span-1
Jun 28 12:05:17 elx kernel: dahdi_devices pci:0000:04:00.0: local span 1 is already assigned span 1
Jun 28 12:05:17 elx kernel: wcte13xp 0000:04:00.0: Span configured for CCS/HDB3
Jun 28 12:05:17 elx kernel: wcte13xp 0000:04:00.0: Calling startup (flags is 4099)
Jun 28 12:05:17 elx kernel: wcte13xp 0000:04:00.0: Setting yellow alarm