Ajouter un callerID dans FreePBX

**sunny** · 14/12/2010, 19h04

Bonjour à tous,

J'aurai besoin d'un petit coup de main. J'essai de rajouter un 0 aux appels entrants dans FreePBX. La problématique initial est que tout les numéros arrivant sur mes deux T0 sont dépourvus de 0 (d'ailleurs, si quelqu'un connait un peu dahdi et pourrait savoir pourquoi je n'arrive pas à avoir le 0...).
Bref, je veux le remettre (notamment pour l'annuaire personnelle des utilisateurs et pour le rappel automatique).

J'ai essayé ce bout de dialplan dans extensions_custom.conf, mais sans résultat:

Code:

[from-pstn-custom]
exten => _XXXXXXXXX,1,Set(CALLERID(num)=0${CALLERID(num)})
exten => _XXXXXXXXX,n,Goto(from-pstn,${EXTEN},1)

Malheureusement, ce fichier ne me semble pas lu du tout...

Si quelqu'un avait un élément de réponses, je le remercie d'avance

HS: pour ceux qui ont suivis, j'ai un autre sujet sur lequel je poste régulièrement des questions en tout genre, mais vu le sujet, pense qu'un nouveau poste sera utile pour d'autre.

**tomarch** · 15/12/2010, 09h03

En utilisant la fonction "prefix" des routes entrantes, ça n'irait pas ?

**sunny** · 15/12/2010, 09h52

malheureusent non,

cette fonction ajoute un "mot" au CallerID<name>.
Par exemple, tu as dans ton annuaire quelqu'un qui s'appel "Accueil" au 110, si tu appels avec ce téléphone un autre de l'entreprise, tu auras "Accueil" et en dessous "110". En ajoutant un callerID, tu auras "PREFIXAccueil" en dessous "110".

J'aimerai ajouter un 0 au CallerID<number> moi, c'est un peu différent.

**cedricscha** · 15/12/2010, 10h09

je connais pas vraiment freepbx et tout ce quil va autour,

mais as-tu rediriger tes appels entrants sur dahdi dans ton nouveau contextes ?

as-tu les traces de la CLI ?

**sunny** · 15/12/2010, 10h23

1) Voici la CLI d'un appel sur le 03 (donc arrivé sur la carte de digium, gérée par dahdi):

Code:

-- Accepting call from '664XXXXXX' to '3933' on channel 0/1, span 2
    -- Executing [3933@from-pstn:1] Set("DAHDI/4-1", "__FROM_DID=3933") in new stack
    -- Executing [3933@from-pstn:2] Set("DAHDI/4-1", "CHANNEL(language)=fr") in new stack
    -- Executing [3933@from-pstn:3] Gosub("DAHDI/4-1", "cidlookup,cidlookup_1,1") in new stack
    -- Executing [cidlookup_1@cidlookup:1] ExecIf("DAHDI/4-1", "1?Set(CALLERID(name)=MONNOM)") in new stack
    -- Executing [cidlookup_1@cidlookup:2] Return("DAHDI/4-1", "") in new stack
    -- Executing [3933@from-pstn:4] Gosub("DAHDI/4-1", "app-blacklist-check,s,1") in new stack
    -- Executing [s@app-blacklist-check:1] GotoIf("DAHDI/4-1", "0?blacklisted") in new stack
    -- Executing [s@app-blacklist-check:2] Set("DAHDI/4-1", "CALLED_BLACKLIST=1") in new stack
    -- Executing [s@app-blacklist-check:3] Return("DAHDI/4-1", "") in new stack
    -- Executing [3933@from-pstn:5] ExecIf("DAHDI/4-1", "0 ?Set(CALLERID(name)=664XXXXXXXX)") in new stack
    -- Executing [3933@from-pstn:6] Set("DAHDI/4-1", "__CALLINGPRES_SV=allowed") in new stack
    -- Executing [3933@from-pstn:7] Set("DAHDI/4-1", "CALLERPRES()=allowed_not_screened") in new stack
    -- Executing [3933@from-pstn:8] Goto("DAHDI/4-1", "from-did-direct,103,1") in new stack
    -- Goto (from-did-direct,103,1)
    -- Executing [103@from-did-direct:1] Macro("DAHDI/4-1", "exten-vm,novm,103") in new stack
    -- Executing [s@macro-exten-vm:1] Macro("DAHDI/4-1", "user-callerid,") in new stack
    -- Executing [s@macro-user-callerid:1] Set("DAHDI/4-1", "AMPUSER=664XXXXXX") in new stack
    -- Executing [s@macro-user-callerid:2] GotoIf("DAHDI/4-1", "0?report") in new stack
    -- Executing [s@macro-user-callerid:3] ExecIf("DAHDI/4-1", "1?Set(REALCALLERIDNUM=664XXXXXX)") in new stack
    -- Executing [s@macro-user-callerid:4] Set("DAHDI/4-1", "AMPUSER=") in new stack
    -- Executing [s@macro-user-callerid:5] Set("DAHDI/4-1", "AMPUSERCIDNAME=") in new stack
    -- Executing [s@macro-user-callerid:6] GotoIf("DAHDI/4-1", "1?report") in new stack
    -- Goto (macro-user-callerid,s,10)
    -- Executing [s@macro-user-callerid:10] GotoIf("DAHDI/4-1", "0?continue") in new stack
    -- Executing [s@macro-user-callerid:11] Set("DAHDI/4-1", "__TTL=64") in new stack
    -- Executing [s@macro-user-callerid:12] GotoIf("DAHDI/4-1", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,19)
    -- Executing [s@macro-user-callerid:19] NoOp("DAHDI/4-1", "Using CallerID "MONOM" <664XXXXXX>") in new stack
    -- Executing [s@macro-exten-vm:2] Set("DAHDI/4-1", "RingGroupMethod=none") in new stack
    -- Executing [s@macro-exten-vm:3] Set("DAHDI/4-1", "VMBOX=novm") in new stack
    -- Executing [s@macro-exten-vm:4] Set("DAHDI/4-1", "__EXTTOCALL=103") in new stack
    -- Executing [s@macro-exten-vm:5] Set("DAHDI/4-1", "CFUEXT=") in new stack
    -- Executing [s@macro-exten-vm:6] Set("DAHDI/4-1", "CFBEXT=") in new stack
    -- Executing [s@macro-exten-vm:7] Set("DAHDI/4-1", "RT=""") in new stack
    -- Executing [s@macro-exten-vm:8] Macro("DAHDI/4-1", "record-enable,103,IN") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("DAHDI/4-1", "1?check") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] ExecIf("DAHDI/4-1", "0?MacroExit()") in new stack
    -- Executing [s@macro-record-enable:5] GotoIf("DAHDI/4-1", "0?Group:OUT") in new stack
    -- Goto (macro-record-enable,s,15)
    -- Executing [s@macro-record-enable:15] GotoIf("DAHDI/4-1", "1?IN") in new stack
    -- Goto (macro-record-enable,s,20)
    -- Executing [s@macro-record-enable:20] ExecIf("DAHDI/4-1", "1?MacroExit()") in new stack
    -- Executing [s@macro-exten-vm:9] Macro("DAHDI/4-1", "dial-one,"",tr,103") in new stack
    -- Executing [s@macro-dial-one:1] Set("DAHDI/4-1", "DEXTEN=103") in new stack
    -- Executing [s@macro-dial-one:2] Set("DAHDI/4-1", "DIALSTATUS_CW=") in new stack
    -- Executing [s@macro-dial-one:3] GosubIf("DAHDI/4-1", "0?screen,1") in new stack
    -- Executing [s@macro-dial-one:4] GosubIf("DAHDI/4-1", "0?cf,1") in new stack
    -- Executing [s@macro-dial-one:5] GotoIf("DAHDI/4-1", "1?skip1") in new stack
    -- Goto (macro-dial-one,s,8)
    -- Executing [s@macro-dial-one:8] GotoIf("DAHDI/4-1", "0?nodial") in new stack
    -- Executing [s@macro-dial-one:9] GotoIf("DAHDI/4-1", "0?continue") in new stack
    -- Executing [s@macro-dial-one:10] Set("DAHDI/4-1", "EXTHASCW=ENABLED") in new stack
    -- Executing [s@macro-dial-one:11] GotoIf("DAHDI/4-1", "0?next1:cwinusebusy") in new stack
    -- Goto (macro-dial-one,s,23)
    -- Executing [s@macro-dial-one:23] GotoIf("DAHDI/4-1", "1?next3:continue") in new stack
    -- Goto (macro-dial-one,s,24)
    -- Executing [s@macro-dial-one:24] ExecIf("DAHDI/4-1", "0?Set(DIALSTATUS_CW=BUSY)") in new stack
    -- Executing [s@macro-dial-one:25] GotoIf("DAHDI/4-1", "0?nodial") in new stack
    -- Executing [s@macro-dial-one:26] GosubIf("DAHDI/4-1", "1?dstring,1:dlocal,1") in new stack
    -- Executing [dstring@macro-dial-one:1] Set("DAHDI/4-1", "DSTRING=") in new stack
    -- Executing [dstring@macro-dial-one:2] Set("DAHDI/4-1", "DEVICES=103") in new stack
    -- Executing [dstring@macro-dial-one:3] ExecIf("DAHDI/4-1", "0?Return()") in new stack
    -- Executing [dstring@macro-dial-one:4] ExecIf("DAHDI/4-1", "0?Set(DEVICES=03)") in new stack
    -- Executing [dstring@macro-dial-one:5] Set("DAHDI/4-1", "LOOPCNT=1") in new stack
    -- Executing [dstring@macro-dial-one:6] Set("DAHDI/4-1", "ITER=1") in new stack
    -- Executing [dstring@macro-dial-one:7] Set("DAHDI/4-1", "THISDIAL=SIP/103") in new stack
    -- Executing [dstring@macro-dial-one:8] GosubIf("DAHDI/4-1", "1?zap2dahdi,1") in new stack
    -- Executing [zap2dahdi@macro-dial-one:1] ExecIf("DAHDI/4-1", "0?Return()") in new stack
    -- Executing [zap2dahdi@macro-dial-one:2] Set("DAHDI/4-1", "NEWDIAL=") in new stack
    -- Executing [zap2dahdi@macro-dial-one:3] Set("DAHDI/4-1", "LOOPCNT2=1") in new stack
    -- Executing [zap2dahdi@macro-dial-one:4] Set("DAHDI/4-1", "ITER2=1") in new stack
    -- Executing [zap2dahdi@macro-dial-one:5] Set("DAHDI/4-1", "THISPART2=SIP/103") in new stack
    -- Executing [zap2dahdi@macro-dial-one:6] ExecIf("DAHDI/4-1", "0?Set(THISPART2=DAHDI/103)") in new stack
    -- Executing [zap2dahdi@macro-dial-one:7] Set("DAHDI/4-1", "NEWDIAL=SIP/103&") in new stack
    -- Executing [zap2dahdi@macro-dial-one:8] Set("DAHDI/4-1", "ITER2=2") in new stack
    -- Executing [zap2dahdi@macro-dial-one:9] GotoIf("DAHDI/4-1", "0?begin2") in new stack
    -- Executing [zap2dahdi@macro-dial-one:10] Set("DAHDI/4-1", "THISDIAL=SIP/103") in new stack
    -- Executing [zap2dahdi@macro-dial-one:11] Return("DAHDI/4-1", "") in new stack
    -- Executing [dstring@macro-dial-one:9] Set("DAHDI/4-1", "DSTRING=SIP/103&") in new stack
    -- Executing [dstring@macro-dial-one:10] Set("DAHDI/4-1", "ITER=2") in new stack
    -- Executing [dstring@macro-dial-one:11] GotoIf("DAHDI/4-1", "0?begin") in new stack
    -- Executing [dstring@macro-dial-one:12] Set("DAHDI/4-1", "DSTRING=SIP/103") in new stack
    -- Executing [dstring@macro-dial-one:13] Return("DAHDI/4-1", "") in new stack
    -- Executing [s@macro-dial-one:27] GotoIf("DAHDI/4-1", "0?nodial") in new stack
    -- Executing [s@macro-dial-one:28] GotoIf("DAHDI/4-1", "1?skiptrace") in new stack
    -- Goto (macro-dial-one,s,30)
    -- Executing [s@macro-dial-one:30] Set("DAHDI/4-1", "D_OPTIONS=tr") in new stack
    -- Executing [s@macro-dial-one:31] ExecIf("DAHDI/4-1", "0?SIPAddHeader(Alert-Info: )") in new stack
    -- Executing [s@macro-dial-one:32] ExecIf("DAHDI/4-1", "0?SIPAddHeader()") in new stack
    -- Executing [s@macro-dial-one:33] ExecIf("DAHDI/4-1", "0?SetMusicOnHold()") in new stack
    -- Executing [s@macro-dial-one:34] GosubIf("DAHDI/4-1", "0?qwait,1") in new stack
    -- Executing [s@macro-dial-one:35] Set("DAHDI/4-1", "__CWIGNORE=") in new stack
    -- Executing [s@macro-dial-one:36] Set("DAHDI/4-1", "__KEEPCID=TRUE") in new stack
    -- Executing [s@macro-dial-one:37] Dial("DAHDI/4-1", "SIP/103,"",tr") in new stack
  == Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
    -- Called 103
    -- SIP/103-0000001a is ringing
    -- Channel 0/1, span 2 got hangup, cause 16
  == Spawn extension (macro-dial-one, s, 37) exited non-zero on 'DAHDI/4-1' in macro 'dial-one'
  == Spawn extension (macro-exten-vm, s, 9) exited non-zero on 'DAHDI/4-1' in macro 'exten-vm'
  == Spawn extension (from-did-direct, 103, 1) exited non-zero on 'DAHDI/4-1'
    -- Executing [h@from-did-direct:1] Macro("DAHDI/4-1", "hangupcall,") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("DAHDI/4-1", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,4)
    -- Executing [s@macro-hangupcall:4] GotoIf("DAHDI/4-1", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,7)
    -- Executing [s@macro-hangupcall:7] GotoIf("DAHDI/4-1", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] Hangup("DAHDI/4-1", "") in new stack
  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'DAHDI/4-1' in macro 'hangupcall'
  == Spawn extension (from-did-direct, h, 1) exited non-zero on 'DAHDI/4-1'
    -- Hungup 'DAHDI/4-1'

2) Pour freepbx, il y a un problème. Lorsque je change le fichier extensions_custom.conf, rien ne change...

**cedricscha** · 15/12/2010, 10h30

mets voir dans ton dahdi comme contexte ton from-pstn-custom

et mets la trace CLI ici

**sunny** · 15/12/2010, 11h50

Code:

 -- Extension '3933' in context 'from-pstn-custom' from '664XXXXXX' does not exist.  Rejecting call on channel 0/1, span 1

j'ai du loupé un truc...je reregarde.

**cedricscha** · 15/12/2010, 12h01

bah pour tes tests, tu peux mettre _X.,

dans ton contexte from_pstn_custom..... tu risques pas grand choses si il y a que cela.

**sunny** · 15/12/2010, 12h13

j'ai mi ça après, mais j'ai le même résultat.

Je crois qu'il arrive pas du tout à lire le fichier extensions_custom.conf en faite....

**cedricscha** · 15/12/2010, 12h18

essaie dans la cli :

Code:

dialplan show 1234@from-pstn-custom

ainsi qu'un :

Code:

dialplan show from-pstn-custom

Discussion: Ajouter un callerID dans FreePBX

Outils de la discussion

Rechercher dans la discussion

Affichage

Ajouter un callerID dans FreePBX

Règles de messages