J'ai enfin réussit à configurer une carte avec un module FXO et un module BRI pour que ça marche ! Par contre, il semblerait qu'avec les BIV d'Orange, il faut configurer le signaling des modules BRI en PTP (bri_cpe) pour que ça marche.
Il ne me reste plus qu'à ajouter la deuxième carte, voir s'il y a des problèmes et à régler des petits détails (principalement l'affichage de notre numéro lorsque l'on sort).
Pour ceux que ça intéresse, je me retrouve avec les configurations suivantes :
system.conf :
Code:
span=1,1,0,ccs,ami,term,te
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2
# Span 2: WCBRI/0/1 "HB8-0000 Board 1" AMI/CCS RED
span=2,2,0,ccs,ami,term,te
# termtype: te
bchan=4-5
hardhdlc=6
echocanceller=mg2,4-5
# Span 3: WCBRI/0/2 "HB8-0000 Board 1" AMI/CCS RED
span=3,3,0,ccs,ami,term,te
# termtype: te
bchan=7-8
hardhdlc=9
echocanceller=mg2,7-8
# Span 4: WCBRI/0/3 "HB8-0000 Board 1" AMI/CCS RED
span=4,4,0,ccs,ami,term,te
# termtype: te
bchan=10-11
hardhdlc=12
echocanceller=mg2,10-11
# Span 5: WCTDM/0 "HB8-0000 Board 1"
fxsks=13
echocanceller=mg2,13
fxsks=14
echocanceller=mg2,14
fxsks=15
echocanceller=mg2,15
fxsks=16
echocanceller=mg2,16
# channel 17, WCTDM/0/4, no module.
# channel 18, WCTDM/0/5, no module.
# channel 19, WCTDM/0/6, no module.
# channel 20, WCTDM/0/7, no module.
# Global data
loadzone = fr
defaultzone = fr
chan_dahdi.conf (avec dahdi-channels.conf) :
Code:
[channels]
pridialplan=unknown
prilocaldialplan=unknown
priindication=outofband
nationalprefix=0
internationalprefix=00
language = fr
echocancel = yes
; Span 1: WCBRI/0/0 "HB8-0000 Board 1" (MASTER) AMI/CCS RED
; PORT 5
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 1-2
; Span 2: WCBRI/0/1 "HB8-0000 Board 1" AMI/CCS RED
; PORT 6
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 4-5
; Span 3: WCBRI/0/2 "HB8-0000 Board 1" AMI/CCS RED
; PORT 7
group=0,13
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 7-8
; Span 4: WCBRI/0/3 "HB8-0000 Board 1" AMI/CCS RED
; PORT 8
group=0,14
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 10-11
; Span 5: WCTDM/0 "HB8-0000 Board 1"
;;; line="13 WCTDM/0/0 FXSKS"
; PORT 1
signalling=fxs_ks
callerid=asreceived
group=30
context=from-pstn
channel => 13
;;; line="14 WCTDM/0/1 FXSKS"
; PORT 2
signalling=fxs_ks
callerid=asreceived
group=31
context=from-pstn
channel => 14
;;; line="15 WCTDM/0/2 FXSKS"
; PORT 3
signalling=fxs_ks
callerid=asreceived
group=32
context=from-pstn
channel => 15
;;; line="16 WCTDM/0/3 FXSKS"
; PORT 4
signalling=fxs_ks
callerid=asreceived
group=33
context=from-pstn
channel => 16
extensions.ael : (pour sortir sur un des ports du module BRI)
Code:
Dial(DAHDI/g11/${EXTEN})
Les appels entrants et sortants marchent très bien.
Merci en tout cas pour votre aide, ça m'a été utile !