PROB pas de son quand je décroche mon téléphone

[fastm3]

Mais lorsque on ajoute canreinvite = yes

Oui mais le mieux est de ne pas activer canreinvite pour l'extension remote et alors on n'a jamais à ouvrir quoique ce soit ce qui est nettement plus confortable, non ?
Si on a besoin de forwarder des ports dans cette config, le routeur a effectivement un gros soucis mais bon freebox, livebox, neufbox, linksys, dlink... ne m'ont pas posé de pb pour des extensions isolées en config double nat. Si meme avec la livebox ca marche...
On demandera eventuellement juste si possible au tel/ata d'utiliser des ports fixes pour faciliter le travail du routeur.

Donc:
- verif config nat dans sip.conf -> analyse des settings du fichier.
- verif rtp.conf -> analyse/modif des settings du fichier.

Apres on determine les ports a forwarder vers le serveur asterisk coté serveur. Si c'est la config par defaut, ca sera udp 5060 et udp 10000-20000 mais c'est a verifier...Si la config nat est incorrecte, ca ne marchera pas meme si les bons ports sont forwardés. Ne pas se focaliser donc uniquement sur le routeur.
Fastm3.

[hugocholet]

les ports 10000 et 20000 ouvert.
pas activer canreinvite : oki

cela ne fontionne toujours pas de plis mon iphone se connecte en 3g et ce la ne fonctionne pas tonalité pas de son.

2c62;2", "NEWDIAL=") in new stack
    -- Executing [zap2dahdi@macro-dial-one:3] Set("Local/FMPR-100@from-internal-                                                                                        2c62;2", "LOOPCNT2=1") in new stack
    -- Executing [zap2dahdi@macro-dial-one:4] Set("Local/FMPR-100@from-internal-                                                                                        2c62;2", "ITER2=1") in new stack
    -- Executing [zap2dahdi@macro-dial-one:5] Set("Local/FMPR-100@from-internal-                                                                                        2c62;2", "THISPART2=SIP/100") in new stack
    -- Executing [zap2dahdi@macro-dial-one:6] ExecIf("Local/FMPR-100@from-intern                                                                                        al-2c62;2", "0?Set(THISPART2=DAHDI/100)") in new stack
    -- Executing [zap2dahdi@macro-dial-one:7] Set("Local/FMPR-100@from-internal-                                                                                        2c62;2", "NEWDIAL=SIP/100&") in new stack
    -- Executing [zap2dahdi@macro-dial-one:8] Set("Local/FMPR-100@from-internal-                                                                                        2c62;2", "ITER2=2") in new stack
    -- Executing [zap2dahdi@macro-dial-one:9] GotoIf("Local/FMPR-100@from-intern                                                                                        al-2c62;2", "0?begin2") in new stack
    -- Executing [zap2dahdi@macro-dial-one:10] Set("Local/FMPR-100@from-internal                                                                                        -2c62;2", "THISDIAL=SIP/100") in new stack
    -- Executing [zap2dahdi@macro-dial-one:11] Return("Local/FMPR-100@from-inter                                                                                        nal-2c62;2", "") in new stack
    -- Executing [dstring@macro-dial-one:9] Set("Local/FMPR-100@from-internal-2c                                                                                        62;2", "DSTRING=SIP/100&") in new stack
    -- Executing [dstring@macro-dial-one:10] Set("Local/FMPR-100@from-internal-2                                                                                        c62;2", "ITER=2") in new stack
    -- Executing [dstring@macro-dial-one:11] GotoIf("Local/FMPR-100@from-interna                                                                                        l-2c62;2", "0?begin") in new stack
    -- Executing [dstring@macro-dial-one:12] Set("Local/FMPR-100@from-internal-2                                                                                        c62;2", "DSTRING=SIP/100") in new stack
    -- Executing [dstring@macro-dial-one:13] Return("Local/FMPR-100@from-interna                                                                                        l-2c62;2", "") in new stack
    -- Executing [s@macro-dial-one:27] GotoIf("Local/FMPR-100@from-internal-2c62                                                                                        ;2", "0?nodial") in new stack
    -- Executing [s@macro-dial-one:28] GotoIf("Local/FMPR-100@from-internal-2c62                                                                                        ;2", "1?skiptrace") in new stack
    -- Goto (macro-dial-one,s,30)
    -- Executing [s@macro-dial-one:30] Set("Local/FMPR-100@from-internal-2c62;2"                                                                                        , "D_OPTIONS=trM(auto-blkvm)") in new stack
    -- Executing [s@macro-dial-one:31] ExecIf("Local/FMPR-100@from-internal-2c62                                                                                        ;2", "0?SIPAddHeader(Alert-Info: )") in new stack
    -- Executing [s@macro-dial-one:32] ExecIf("Local/FMPR-100@from-internal-2c62                                                                                        ;2", "0?SIPAddHeader()") in new stack
    -- Executing [s@macro-dial-one:33] ExecIf("Local/FMPR-100@from-internal-2c62                                                                                        ;2", "1?Set(CHANNEL(musicclass)=)") in new stack
    -- Executing [s@macro-dial-one:34] GosubIf("Local/FMPR-100@from-internal-2c6                                                                                        2;2", "0?qwait,1") in new stack
    -- Executing [s@macro-dial-one:35] Set("Local/FMPR-100@from-internal-2c62;2"                                                                                        , "__CWIGNORE=") in new stack
    -- Executing [s@macro-dial-one:36] Set("Local/FMPR-100@from-internal-2c62;2"                                                                                        , "__KEEPCID=TRUE") in new stack
    -- Executing [s@macro-dial-one:37] Dial("Local/FMPR-100@from-internal-2c62;2                                                                                        ", "SIP/100,19,trM(auto-blkvm)") in new stack
  == Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
    -- Called 100
    -- Local/FMPR-100@from-internal-2c62;1 is ringing
    -- Local/100@from-queue-704f;1 is ringing
    -- SIP/100-0000002f is ringing
    -- Local/FMPR-100@from-internal-2c62;1 is ringing
    -- <Local/104@from-queue-29c1;2> Playing 'cannot-complete-as-dialed.gsm' (la                                                                                        nguage 'en')

[ffossard]

Illisible votre CLI, pouvez-vous enlever les espaces superflus ?

[hugocholet]

[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [s@macro-dial-one:25] GotoIf("Local/FMPR-100@from-internal-32d6;2", "0?nodial") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [s@macro-dial-one:26] GosubIf("Local/FMPR-100@from-internal-32d6;2", "1?dstring,1:dlocal,1") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:1] Set("Local/FMPR-100@from-internal-32d6;2", "DSTRING=") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:2] Set("Local/FMPR-100@from-internal-32d6;2", "DEVICES=100") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:3] ExecIf("Local/FMPR-100@from-internal-32d6;2", "0?Return()") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:4] ExecIf("Local/FMPR-100@from-internal-32d6;2", "0?Set(DEVICES=00)") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:5] Set("Local/FMPR-100@from-internal-32d6;2", "LOOPCNT=1") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:6] Set("Local/FMPR-100@from-internal-32d6;2", "ITER=1") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:7] Set("Local/FMPR-100@from-internal-32d6;2", "THISDIAL=SIP/100") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:8] GosubIf("Local/FMPR-100@from-internal-32d6;2", "1?zap2dahdi,1") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:1] ExecIf("Local/FMPR-100@from-internal-32d6;2", "0?Return()") in new stack
[Feb 14 21:20:57] VERBOSE[3440] pbx.c: -- Executing [FMGL-107@from-internal:1] NoOp("Local/FMGL-107@from-internal-c6a8;2", "In FMGL 100 with 107") in new stack
[Feb 14 21:20:57] VERBOSE[3440] pbx.c: -- Executing [FMGL-107@from-internal:2] GotoIf("Local/FMGL-107@from-internal-c6a8;2", "0?dodnd") in new stack
[Feb 14 21:20:57] VERBOSE[3440] pbx.c: -- Executing [FMGL-107@from-internal:3] Wait("Local/FMGL-107@from-internal-c6a8;2", "1") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:2] Set("Local/FMPR-100@from-internal-32d6;2", "NEWDIAL=") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:3] Set("Local/FMPR-100@from-internal-32d6;2", "LOOPCNT2=1") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:4] Set("Local/FMPR-100@from-internal-32d6;2", "ITER2=1") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:5] Set("Local/FMPR-100@from-internal-32d6;2", "THISPART2=SIP/100") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:6] ExecIf("Local/FMPR-100@from-internal-32d6;2", "0?Set(THISPART2=DAHDI/100)") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:7] Set("Local/FMPR-100@from-internal-32d6;2", "NEWDIAL=SIP/100&") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:8] Set("Local/FMPR-100@from-internal-32d6;2", "ITER2=2") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:9] GotoIf("Local/FMPR-100@from-internal-32d6;2", "0?begin2") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:10] Set("Local/FMPR-100@from-internal-32d6;2", "THISDIAL=SIP/100") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [zap2dahdi@macro-dial-one:11] Return("Local/FMPR-100@from-internal-32d6;2", "") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:9] Set("Local/FMPR-100@from-internal-32d6;2", "DSTRING=SIP/100&") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:10] Set("Local/FMPR-100@from-internal-32d6;2", "ITER=2") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:11] GotoIf("Local/FMPR-100@from-internal-32d6;2", "0?begin") in new stack
[Feb 14 21:20:57] VERBOSE[3439] pbx.c: -- Executing [dstring@macro-dial-one:12] Set("Local/FMPR-100@from-internal-32d6;2", "DSTRING=SIP/100") in new stack
[Feb 14 21:21:07] VERBOSE[3439] app_macro.c: == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'Local/FMPR-100@from-internal-32d6;2' in macro 'hangupcall'
[Feb 14 21:21:07] VERBOSE[3439] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on 'Local/FMPR-100@from-internal-32d6;2'
[Feb 14 21:21:07] VERBOSE[3440] res_agi.c: dialparties.agi: Starting New Dialparties.agi

[hugocholet]

voici ma config de mon routeur au niveau ports ouvert. asterisk = 192.168.1.6

http://hugoprod.net/logiciel/port1.jpg

http://hugoprod.net/logiciel/port2.jpg

[hugocholet]

Avec mon iPhone c'est pareil,faut il acheter un codec g729, je passe avec Brian une aplication iPhone. Sur le iPhone il met g711 /8000 / 8000 cela veut dire le portS. Merci de votre aide.