L'état de mon ipbx devient de plus en plus stable.
J'ai utilisé un câble un peu spécial les pines 1->4 et 2->5 et après le diode devient vert.

Par contre, et même après avoir consulté le support digium j'ai quelques Notices qui s'affichent toujours et que je ne trouve pas leur source:

Dans /var/log/messages:
Apr 23 17:30:43 stalingrad kernel: [2042605.280283] wct4xxp 0000:04:08.0: All spans in alarm : No validspan to source RCLK from
Apr 23 17:30:43 stalingrad kernel: [2042605.280283] wct4xxp 0000:04:08.0: RCLK source set to span 1
Apr 23 17:31:05 stalingrad kernel: [2042628.060468] wct4xxp 0000:04:08.0: RCLK source set to span 1

et dans /var/log/asterisk/messages

[Apr 23 22:31:39] NOTICE[19112] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
[Apr 23 22:31:39] NOTICE[19112] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
[Apr 23 22:31:39] NOTICE[19112] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
[Apr 23 22:31:39] NOTICE[19112] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
[Apr 23 22:33:44] NOTICE[19112] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1

Voici ma configuration actuelle:

# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

CRC est activé par le provider.

Il y a d'autres paramètres dans system.conf.samples que je comprends pas leur utilité tels que nethdlc et sethdlc, hardhdlc... est ce qu'ils sont nécessaires dans mon cas ?

Merci