Probleme :Your call cannot be completed as dial ''solved''

[remyuk]

salut, jobtient cet erreur quand j'esseye de faire un appel sortant.
je vous joint mes infos.

pbx*CLI> Sip show peers

Name/username              Host            Dyn Nat ACL Port     Status
101/101                    192.168.1.7      D   N   A  5940     OK (49 ms)
sipgate/1129201            217.10.79.23                5060     OK (63 ms)
2 sip peers [Monitored: 2 online, 0 offline Unmonitored: 0 online, 0 offline]
    -- Remote UNIX connection
    -- Remote UNIX connection disconnected

Voici ce que j'ai lors de mon test.

== Using SIP RTP CoS mark 5
    -- Executing [08000556688@from-internal:1] ResetCDR("SIP/101-00000004", "") in new stack
    -- Executing [08000556688@from-internal:2] NoCDR("SIP/101-00000004", "") in new stack
    -- Executing [08000556688@from-internal:3] Progress("SIP/101-00000004", "") in new stack
    -- Executing [08000556688@from-internal:4] Wait("SIP/101-00000004", "1") in new stack
    -- Executing [08000556688@from-internal:5] Playback("SIP/101-00000004", "silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer") in new stack
    -- <SIP/101-00000004> Playing 'silence/1.gsm' (language 'en')
    -- <SIP/101-00000004> Playing 'cannot-complete-as-dialed.gsm' (language 'en')
    -- <SIP/101-00000004> Playing 'check-number-dial-again.gsm' (language 'en')
    -- Executing [08000556688@from-internal:6] Wait("SIP/101-00000004", "1") in new stack
    -- Executing [08000556688@from-internal:7] Congestion("SIP/101-00000004", "20") in new stack
  == Spawn extension (from-internal, 08000556688, 7) exited non-zero on 'SIP/101-00000004'
    -- Executing [h@from-internal:1] Macro("SIP/101-00000004", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/101-00000004", "1?noautomon") in new stack
    -- Goto (macro-hangupcall,s,3)
    -- Executing [s@macro-hangupcall:3] NoOp("SIP/101-00000004", "TOUCH_MONITOR_OUTPUT=") in new stack
    -- Executing [s@macro-hangupcall:4] GotoIf("SIP/101-00000004", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,7)
    -- Executing [s@macro-hangupcall:7] GotoIf("SIP/101-00000004", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,10)
    -- Executing [s@macro-hangupcall:10] GotoIf("SIP/101-00000004", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,12)
    -- Executing [s@macro-hangupcall:12] Hangup("SIP/101-00000004", "") in new stack
  == Spawn extension (macro-hangupcall, s, 12) exited non-zero on 'SIP/101-00000004' in macro 'hangupcall'
  == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/101-00000004'
    -- Remote UNIX connection
    -- Remote UNIX connection disconnected

infos sip trunck

General Settings

Trunk Description:	
Outbound Caller ID: mon id	
CID Options:	
Maximum Channels:	
Disable Trunk:	Disable
Monitor Trunk Failures:	  Enable
Outgoing Dial Rules 

Dial Rules:	rien

Dial Rules Wizards:	
Outbound Dial Prefix:	rien
Outgoing Settings

Trunk Name: sipgate	
PEER Details:
disallow=all
allow=ulaw&alaw&g729&alaw&ulaw)
type=peer
fromdomain=sipgate.co.uk
host=sipgate.co.uk
insecure=very
qualify=yes
secret=xxxxx
username=xxxx


Incoming Settings



USER Context:	mon id
USER Details:
context=from-trunk
fromuser=mon id
insecure=very
secret= pw
type=user
username=mon id

Registration

Register String:
monid:pw@sipgate.co.uk/monid

Je pense que mon probleme vient du dial plan, jai fait queleque recherche mais ya rien a faire, donc vos info ou tutos sont les bien venus. see ya take care.