Probleme tonalité et Dchannels

[koma87]

Bon voila je ne perds plus la synchro des lignes , après plusieurs appels vers orange et un technicien plus sympa que les autres.
Ils m'ont activé les lignes de façon permanente chose qui n'était pas faite jusqu'à présent.

Sinon par contre toujours mon problème de tonalité
Voila ce que j'ai lors d'un appel

-- Executing [00438120151@all:3] Dial("SIP/203-00000033", "DAHDI/2/0438120151") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called 2/0438120151
-- DAHDI/i1/0438120151-a is proceeding passing it to SIP/203-00000033
-- PROGRESS with cause code 114 received
-- DAHDI/i1/0438120151-a answered SIP/203-00000033

[Reaper]

114 Remote user suspended

The call has been placed on hold or suspended at the remote end.

La cause code 114 fait partie de la signalisation normale.

[cedricscha]

as-tu fais un

pri intense debug span 1

et lu ce que cela donnait ?

[koma87]

1 > N(R): 003 P: 0
1 > 4 bytes of data
1 > Protocol Discriminator: Q.931 (8) len=4
1 > TEI=64 Call Ref: len= 1 (reference 3/0x3) (Sent from originator)
1 > Message Type: CONNECT ACKNOWLEDGE (15)
1 -- Stopping T203 timer
1 -- Starting T200 timer
1 Done handling message for SAPI/TEI=0/64
Span: 1 Processing event: PRI_EVENT_ANSWER
1
1 < TEI: 64 State 7(Multi-frame established)
1 < V(A)=1, V(S)=2, V(R)=3
1 < K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
1 < T200_id=1, N200=3, T203_id=0
1 < [ 00 81 01 04 ]
1 < Supervisory frame:
1 < SAPI: 00 C/R: 0 EA: 0
1 < TEI: 064 EA: 1
1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
1 < N(R): 002 P/F: 0
1 < 0 bytes of data
1 -- Got ACK for N(S)=1 to (but not including) N(S)=2
1 -- ACKing N(S)=1, txqueue head is N(S)=-1 (-1 is empty, -2 is not transmitted)
1 -- Stopping T200 timer
1 -- Starting T203 timer
1 Done handling message for SAPI/TEI=0/64
1 q931_hangup: other hangup
1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Connect Request, hold-state Idle
1 q931.c:4845 q931_disconnect: Call 32771 enters state 11 (Disconnect Request). Hold state: Idle
1
1 > DL-DATA request
1 > Protocol Discriminator: Q.931 (8) len=8
1 > TEI=64 Call Ref: len= 1 (reference 3/0x3) (Sent from originator)
1 > Message Type: DISCONNECT (69)
1 TEI=64 Transmitting N(S)=2, window is open V(A)=2 K=1
1
1 > TEI: 64 State 7(Multi-frame established)
1 > V(A)=2, V(S)=2, V(R)=3
1 > K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
1 > T200_id=0, N200=3, T203_id=1
1 > [ 00 81 04 06 08 01 03 45 08 02 81 90 ]
1 > Informational frame:
1 > SAPI: 00 C/R: 0 EA: 0
1 > TEI: 064 EA: 1
1 > N(S): 002 0: 0
1 > N(R): 003 P: 0
1 > 8 bytes of data
1 > Protocol Discriminator: Q.931 (8) len=8
1 > TEI=64 Call Ref: len= 1 (reference 3/0x3) (Sent from originator)
1 > Message Type: DISCONNECT (69)
1 > [08 02 81 90]
1 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1)
1 > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ]
1 -- Stopping T203 timer
1 -- Starting T200 timer
== Spawn extension (all, 00254429321, 2) exited non-zero on 'SIP/203-0000000c'
== Extension Changed 203[BLF] new state Idle for Notify User 204
== Extension Changed 203[BLF] new state Idle for Notify User 201
== Extension Changed 203[BLF] new state Idle for Notify User 202
1
1 < TEI: 64 State 7(Multi-frame established)
1 < V(A)=2, V(S)=3, V(R)=3
1 < K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
1 < T200_id=1, N200=3, T203_id=0
1 < [ 00 81 01 06 ]
1 < Supervisory frame:
1 < SAPI: 00 C/R: 0 EA: 0
1 < TEI: 064 EA: 1
1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
1 < N(R): 003 P/F: 0
1 < 0 bytes of data
1 -- Got ACK for N(S)=2 to (but not including) N(S)=3
1 -- ACKing N(S)=2, txqueue head is N(S)=-1 (-1 is empty, -2 is not transmitted)
1 -- Stopping T200 timer
1 -- Starting T203 timer
1 Done handling message for SAPI/TEI=0/64
1
1 < TEI: 64 State 7(Multi-frame established)
1 < V(A)=3, V(S)=3, V(R)=3
1 < K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
1 < T200_id=0, N200=3, T203_id=1
1 < [ 02 81 06 06 08 01 83 4d ]
1 < Informational frame:
1 < SAPI: 00 C/R: 1 EA: 0
1 < TEI: 064 EA: 1
1 < N(S): 003 0: 0
1 < N(R): 003 P: 0
1 < 4 bytes of data
1 < Protocol Discriminator: Q.931 (8) len=4
1 < TEI=64 Call Ref: len= 1 (reference 3/0x3) (Sent to originator)
1 < Message Type: RELEASE (77)
1 -- Got ACK for N(S)=3 to (but not including) N(S)=3
1 -- T200 requested to stop when not started
1 T203 requested to start without stopping first
1 -- Starting T203 timer
1 Received message for call 0x91b4360 on 0x90f38d0 TEI/SAPI 64/0, call->pri is 0x90efd00 TEI/SAPI 127/63
1 q931.c:7237 post_handle_q931_message: Call 32771 enters state 0 (Null). Hold state: Idle
1
1 > TEI: 64 State 7(Multi-frame established)
1 > V(A)=3, V(S)=3, V(R)=4
1 > K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
1 > T200_id=0, N200=3, T203_id=1
1 > [ 02 81 01 08 ]
1 > Supervisory frame:
1 > SAPI: 00 C/R: 1 EA: 0
1 > TEI: 064 EA: 1
1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
1 > N(R): 004 P/F: 0
1 > 0 bytes of data
1 Done handling message for SAPI/TEI=0/64
Span: 1 Processing event: PRI_EVENT_HANGUP
1 q931_hangup: other hangup
1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request, hold-state Idle
1
1 > DL-DATA request
1 > Protocol Discriminator: Q.931 (8) len=8
1 > TEI=64 Call Ref: len= 1 (reference 3/0x3) (Sent from originator)
1 > Message Type: RELEASE COMPLETE (90)
1 TEI=64 Transmitting N(S)=3, window is open V(A)=3 K=1
1
1 > TEI: 64 State 7(Multi-frame established)
1 > V(A)=3, V(S)=3, V(R)=4
1 > K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
1 > T200_id=0, N200=3, T203_id=1
1 > [ 00 81 06 08 08 01 03 5a 08 02 81 90 ]
1 > Informational frame:
1 > SAPI: 00 C/R: 0 EA: 0
1 > TEI: 064 EA: 1
1 > N(S): 003 0: 0
1 > N(R): 004 P: 0
1 > 8 bytes of data
1 > Protocol Discriminator: Q.931 (8) len=8
1 > TEI=64 Call Ref: len= 1 (reference 3/0x3) (Sent from originator)
1 > Message Type: RELEASE COMPLETE (90)
1 > [08 02 81 90]
1 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1)
1 > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ]
1 -- Stopping T203 timer
1 -- Starting T200 timer
1 q931_hangup: other hangup
1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null, hold-state Idle
1 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null, hold-state Idle
1
1 < TEI: 64 State 7(Multi-frame established)
1 < V(A)=3, V(S)=4, V(R)=4
1 < K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
1 < T200_id=1, N200=3, T203_id=0
1 < [ 00 81 01 08 ]
1 < Supervisory frame:
1 < SAPI: 00 C/R: 0 EA: 0
1 < TEI: 064 EA: 1
1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
1 < N(R): 004 P/F: 0
1 < 0 bytes of data
1 -- Got ACK for N(S)=3 to (but not including) N(S)=4
1 -- ACKing N(S)=3, txqueue head is N(S)=-1 (-1 is empty, -2 is not transmitted)
1 -- Stopping T200 timer
1 -- Starting T203 timer
1 Done handling message for SAPI/TEI=0/64
1
1 < TEI: 64 State 7(Multi-frame established)
1 < V(A)=4, V(S)=4, V(R)=4
1 < K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
1 < T200_id=0, N200=3, T203_id=1
1 < [ 02 81 53 ]
1 < Unnumbered frame:
1 < SAPI: 00 C/R: 1 EA: 0
1 < TEI: 064 EA: 1
1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ]
1 < 0 bytes of data
1 TEI=64 Got DISC
1 TEI=64 Sending UA
1
1 > TEI: 64 State 7(Multi-frame established)
1 > V(A)=4, V(S)=4, V(R)=4
1 > K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
1 > T200_id=0, N200=3, T203_id=1
1 > [ 02 81 73 ]
1 > Unnumbered frame:
1 > SAPI: 00 C/R: 1 EA: 0
1 > TEI: 064 EA: 1
1 > M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
1 > 0 bytes of data
1 TEI=64 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
1 -- T200 requested to stop when not started
1 -- Stopping T203 timer
1 Changing from state 7(Multi-frame established) to 4(TEI assigned)
1 Done handling message for SAPI/TEI=0/64


Voila le pri intense
Si tu pouvais me dire ce qu'il faut chercher???
C'est obscure tout cela pour moi

[koma87]

Bonjour,

Je me permets de relancer.

J'ai toujours ce problème de tonalité sur des appels en 04 et 01.
J'ai toujours pas trouvé d'où cela vient j'ai un autre serveur configurer sensiblement à l'identique et pas de soucis.

Si quelqu'un a une petite idée


Merci

[koma87]

Bonjour problème résolu.

Petite question sur l'installation en question est sur une autre faite il y a 1 semaine j'ai retrouvé un problème récurrent.

La perte de synchro entre la b410p et les T0 (des qu'aucun appel arrivé sur la ligne, impossibilité de faire un appel vers l’extérieur), la seule solution a été d'appeler FT pour qu'ils mettent l'option synchro permanente.

Cela vous arrive t'il aussi ou j'ai raté un truc dans la conf