bah le sujet parle de h323 non![]()
bah le sujet parle de h323 non![]()
Dernière modification par quintana ; 24/03/2011 à 22h13.
Découvrez Wazo sous licence GPLv3 et accessible pour tous : http://www.wazo.community
Blog Wazo : http://blog.wazo.community
Wazo est un fork de XiVO.
Suivez moi sur Twitter !
Autant pour moi, j'avais modifié mon extensino.conf entre temp, à cet instan voici mes fichiers de config avec toujours la même erreur:
extension.conf
Code:[internal] exten => 500,1,dial(DAHDI/1,30,tr) exten => 500,2,echo() exten => 501,1,dial(DAHDI/2,30,tr) exten => 501,2,echo() exten => 502,1,dial(DAHDI/3,30,tr) exten => 502,2,echo() [internal] exten => 1000,1,dial(SIP/1000,30,tr) [internal] exten => 2000,1,dial(OOH323/2000,20,tr)
h323.confCode:[channels] language=fr [general] port=1720 h323id=ObjSysAsterisk callerid=asterisk gateway=no context=default disallow=all allow=ulaw dtmfmode=rfc2833 [2000] type=friend context=internal ip=192.168.1.12 dtmfmode=rfc2833 e164=2000 H323ID=2000 disallow=all allow=ulaw allow=gsm dtmfmode=h245signal secret=2000
Code:[general] port=1720 h323id=ObjSysAsterisk callerid=asterisk gateway=no context=default disallow=all allow=ulaw dtmfmode=rfc2833 [2000] type=friend context=internal ip=192.168.1.12 dtmfmode=rfc2833 e164=2000 H323ID=2000 disallow=all allow=ulaw allow=gsm dtmfmode=h245signal secret=2000
Je n'ai pas le H323 pourtant je l'ai bien installé...Code:core show channeltypes Type Description Devicestate Indications Transfer ---------- ----------- ----------- ----------- -------- USTM UNISTIM Channel Driver no yes no Console OSS Console Channel Driver no yes no Phone Standard Linux Telephony API Driver no yes no Skinny Skinny Client Control Protocol (Skinny) yes yes no SIP Session Initiation Protocol (SIP) yes yes yes Local Local Proxy Channel Driver yes yes no MulticastR Multicast RTP Paging Channel Driver no no no Bridge Bridge Interaction Channel no no no DAHDI DAHDI Telephony Driver w/PRI yes yes no Agent Call Agent Proxy Channel yes yes no
Je n'ai pas fait de make clean avant de faire make menuselect...
c'eest peut etre le problème?
tu as coché le channel ooh323 dans le make menuconfig ?
En passant quelle version d'Asterisk, moi j'ai fait avec 1.8, si 1.6 ou 1.4 il faut installer les addons.
Découvrez Wazo sous licence GPLv3 et accessible pour tous : http://www.wazo.community
Blog Wazo : http://blog.wazo.community
Wazo est un fork de XiVO.
Suivez moi sur Twitter !
Oui j'ai bien coché ooh323 et lorsque je refait make menuselect j'ai bien [x]coché
je suis avec asterisk-1.8.3
Dans la CLI :
module load chan_ooh323.so
C'est quoi le résultat ? As-tu comme indiqué avant renomé ton fichier chan_ooh323.conf en ooh323.conf.
Clairement ton module n'est pas chargé.
Aussi un ls /var/lib/asterisk/modules/*h323*
Découvrez Wazo sous licence GPLv3 et accessible pour tous : http://www.wazo.community
Blog Wazo : http://blog.wazo.community
Wazo est un fork de XiVO.
Suivez moi sur Twitter !
Code:module load chan_ooh323.so Unable to load module chan_ooh323.so Command 'module load chan_ooh323.so ' failed. [Mar 25 20:52:41] WARNING[2994]: loader.c:829 load_resource: Module 'chan.so' already exists.
Pour l'autre question, je n'ai pas de /var/lib/asterisk/modules...
J'ai renomé mon chan_ooh323.conf et j'ai bien le module h323 qui apaprait lors d'un core show channeltypes
lorsque je compose le numéro "2000"
voici maintenant les erreurs:
En faite maintenant mes seul fichiers de config que je dois touché sont le ooh323.conf ( anciennement chan_ooh323.conf) puis mon extension.confCode:Executing [2000@internal:1] Dial("DAHDI/2-1", "OOH323/2000,20,tr") in new stack [Mar 25 21:44:37] ERROR[2966]: chan_ooh323.c:481 ooh323_alloc: Invalid OOH323 driver ip address [Mar 25 21:44:37] WARNING[2966]: chan_ooh323.c:580 ooh323_request: Unable to build pvt data for '2000' [Mar 25 21:44:37] WARNING[2966]: app_dial.c:2039 dial_exec_full: Unable to create channel of type 'OOH323' (cause 0 - Unknown)
Dernière modification par ghostrider95 ; 25/03/2011 à 22h32.